[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 6 > < TAKE 62 >

62 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCQuery.QueryExpressionStrict	ARCQuery	Class	Describes -Strictness- ON / OFF when executing query.
ARCCore.BasePKAttribute	ARCCore	Class	The class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.BasePKAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCQuery.QueryExpressionStrict.Execute	ARCQuery	ClassMember	Transforms the given input collection into a resulting collection.
ARCCore.BasePKAttribute.GetAttributes	ARCCore	ClassMember	Note that illegal to call for other than -PropertyKeyEnum-.
ARCCore.BasePKAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCQuery.QueryExpressionStrict.TryCheckForExistenceOfKey	ARCQuery	ClassMember	Used by query expressions in order to catch wrong field names used or misspelling of field names.
ARCCore.BasePKAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ClassAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCQuery.QueryExpressionStrict.SyntaxHelp	ARCQuery	ClassMember	STRICT {strictnessLevel}
ARCCore.ClassAttribute	ARCCore	Class	Describes a class.
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCQuery.QueryExpressionTake	ARCQuery	Class	Takes a specific number of elements from the current query result.
ARCCore.ClassAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.ClassMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCQuery.QueryExpressionTake.Execute	ARCQuery	ClassMember	Transforms the given input collection into a resulting collection.
ARCCore.ClassAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.EnumAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCQuery.QueryExpressionTake.TryCheckForExistenceOfKey	ARCQuery	ClassMember	Used by query expressions in order to catch wrong field names used or misspelling of field names.
ARCCore.ClassMemberAttribute	ARCCore	Class	Describes a member of a class (a method).
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCQuery.QueryExpressionTake.SyntaxHelp	ARCQuery	ClassMember	TAKE {Count}
ARCCore.ClassMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCQuery.QueryExpressionWhere	ARCQuery	Class	Executes a 'WHERE {key} {operator} {value}' against the given collection.
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumMemberAttribute.GetAttribute	ARCCore	ClassMember	Note that illegal to call for -PropertyKeyEnum-.
ARCQuery.ValueComparerDateTime.IsAfter	ARCQuery	ClassMember	The modifier 'After' can be prepended in order to mean any time after the specified time.
ARCCore.EnumAttribute	ARCCore	Class	Describes an enum.
ARCCore.EnumMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCQuery.ValueComparerDateTime.IsInterval	ARCQuery	ClassMember	Normally the interval which is compared against is the timespan corresponding to -Resolution-.
ARCCore.EnumAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IPAttribute	ARCCore	Class	Describes -IP- classes (describes at class-level)
ARCQuery.ValueComparerDateTime.InitValue	ARCQuery	ClassMember	For debugging purposes. The initial 'now' value used before calculating -StartPeriod- and -EndPeriod-.
ARCCore.EnumMemberAttribute	ARCCore	Class	Describes an enum's value.
ARCCore.CardinalityExtensions	ARCCore	Class
ARCQuery.ValueComparerDateTime.StartPeriod	ARCQuery	ClassMember	The start of the interval which this instance compares against.
ARCCore.EnumMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.CardinalityExtensions.IsMultiple	ARCCore	ClassMember	Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCQuery.ValueComparerDateTime.EndPeriod	ARCQuery	ClassMember	The end of the interval which this instance compares against.
ARCCore.EnumMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions	ARCCore	Class	Contains a few general nice to have extensions methods.
ARCQuery.ValueComparerDateTime.ToDebugProperties	ARCQuery	ClassMember	Exposes all members of this class.
ARCCore.Extensions.ToStringShort	ARCCore	ClassMember	Returns a shorter representation than -ToStringDB-.
ARCCore.Extensions.ToStringDB	ARCCore	ClassMember	Gives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCQuery.ForeignKey+IKIPEqualityComparer	ARCQuery	Class	Used by -TryGetPInternal- when it needs distinct list of foreign entities, based on their keys
ARCCore.Extensions.ToStringVeryShort	ARCCore	ClassMember	Returns same as -ToStringShort- but without any generics information at all.
ARCCore.Extensions.ForEach	ARCCore	ClassMember	Useful when we want to write collection.ForEach( ... ) instead of
ARCQuery.ForeignKey+ForeignKeySingleStep	ARCQuery	Class
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.KeysAsString	ARCCore	ClassMember	Gives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCQuery.ForeignKey+ForeignKeySingleStep.ForeignType	ARCQuery	ClassMember	The foreign type.
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.GetValue	ARCCore	ClassMember	Gives better error messages when reading value from directory if key does not exist
ARCQuery.ForeignKey+ForeignKeySingleStep.ActualForeignKey	ARCQuery	ClassMember	The actual foreign key like OrderId or CustomerId to use for this step
ARCCore.Extensions.Single	ARCCore	ClassMember	Same as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.Result	ARCCore	ClassMember	Returns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCQuery.ForeignKey+ForeignKeySingleStep.ForeignEntities	ARCQuery	ClassMember	The collection containing all the (foreign) entities for the type that this step leads to
ARCCore.Extensions.SingleOrDefault	ARCCore	ClassMember	Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.ToStringDateAndTime	ARCCore	ClassMember	Uses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCQuery.ForeignKeyDirection	ARCQuery	Enum	Describes the type of traversing to a foreign entity possible.
ARCCore.Extensions.ToStringWithMS	ARCCore	ClassMember	Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.

Generated 2025-11-06 20:27:55.966 UTC