[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 13 > < TAKE 256 >

256 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.EnumAttribute	ARCCore	Class	Describes an enum.
ARCCore.EnumAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.EnumAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.EnumAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.EnumMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringShort	ARCCore	ClassMember	Returns a shorter representation than -ToStringDB-.
ARCCore.Extensions.ToStringVeryShort	ARCCore	ClassMember	Returns same as -ToStringShort- but without any generics information at all.
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.Single	ARCCore	ClassMember	Same as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.SingleOrDefault	ARCCore	ClassMember	Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.ToStringWithMS	ARCCore	ClassMember	Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.IKIP	ARCCore	Class	Container class for key (-IK-), and value (-IP-).
ARCCore.IKIP.AssertTypeIntegrity	ARCCore	ClassMember	See -TryAssertTypeIntegrity- for documentation.
ARCCore.IKIP.TryAssertTypeIntegrity	ARCCore	ClassMember	Asserts that value is of correct type as specified by the key.
ARCCore.IKCoded.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.TryCheckValidEncodedValue	ARCCore	ClassMember	Checks if encoded value is valid.
ARCCore.IKCoded.FromCacheEncoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.FromCacheUnencoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKLong.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.IKString	ARCCore	Class	Index key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKString.FromString	ARCCore	ClassMember	Note how uses instance cache if already exists there
ARCCore.ITypeDescriber.GetSyntaxHelp	ARCCore	ClassMember	Enables explanation of syntax in different contexts from one source:
ARCCore.ParseResult	ARCCore	Class	NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.ParseResult.Result	ARCCore	ClassMember	Will be null if ErrorResponse is set.
ARCCore.ParseResult.ErrorResponse	ARCCore	ClassMember	Will be null if Result is set
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality	ARCCore	ClassMember	Called from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PK.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.PK.TryValidateAndParse	ARCCore	ClassMember	Parses the value according to specifications for this property key.
ARCCore.PK.TryCleanValidateAndParse	ARCCore	ClassMember	Cleans and parses the value according to specifications for this property key.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.GetAllPKForEntityType	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PK.GetAllPKForEntityTypeString	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PK.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PK..ctor	ARCCore	ClassMember	Constructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PK.Type	ARCCore	ClassMember	Returns type from -PKTypeAttribute-'s -Type-.
ARCCore.PK.Cardinality	ARCCore	ClassMember	Returns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.PK.AllPKEnums	ARCCore	ClassMember	All -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PK.__enum	ARCCore	ClassMember	This information is also found as EnumMember.
ARCCore.PKHTMLAttribute	ARCCore	Class	Contains pointer to HTML encoder for a property.
ARCCore.PKHTMLAttribute.Encode	ARCCore	ClassMember	Encodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.IHTMLEncoder	ARCCore	Class	Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKLogAttribute	ARCCore	Class	Explains how logging of changes to a property should be done.
ARCCore.PKLogAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKLogAttribute.DoNotLogAtAll	ARCCore	ClassMember	See -DoNotLogAtAll-.
ARCCore.PKLogAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttribute	ARCCore	Class	Describes relationships between entities (between tables in RDBMS terms).
ARCCore.PKRelAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute	ARCCore	Class	The class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.BasePKAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumMemberAttribute	ARCCore	Class	Describes an enum's value.
ARCCore.EnumMemberAttribute.GetAttribute	ARCCore	ClassMember	Note that illegal to call for -PropertyKeyEnum-.
ARCCore.EnumMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IPAttribute	ARCCore	Class	Describes -IP- classes (describes at class-level)
ARCCore.CardinalityExtensions	ARCCore	Class
ARCCore.CardinalityExtensions.IsMultiple	ARCCore	ClassMember	Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.Extensions	ARCCore	Class	Contains a few general nice to have extensions methods.
ARCCore.Extensions.ToStringDB	ARCCore	ClassMember	Gives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.Extensions.ForEach	ARCCore	ClassMember	Useful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.KeysAsString	ARCCore	ClassMember	Gives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.Extensions.GetValue	ARCCore	ClassMember	Gives better error messages when reading value from directory if key does not exist
ARCCore.Extensions.Result	ARCCore	ClassMember	Returns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.Extensions.ToStringDateAndTime	ARCCore	ClassMember	Uses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.IK	ARCCore	Class	IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCoded	ARCCore	Class	Understands coded and unencoded variants of -IK-.
ARCCore.IKCoded.FromEncoded	ARCCore	ClassMember	Note how uses instance cache if already exists there.
ARCCore.IKCoded.TryEncode	ARCCore	ClassMember	Returns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.IKCoded.ToString	ARCCore	ClassMember	Returns -Encoded-'s string representation.
ARCCore.IKCoded.Encoded	ARCCore	ClassMember	This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKCoded.AllowedEncodedCharacters	ARCCore	ClassMember	The character set 'A...Za...z0...9-_().,='.
ARCCore.IKLong	ARCCore	Class	A more memory efficient alternative to -IKString-.
ARCCore.IKString.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.IKType	ARCCore	Class	Index key used when storing a collection of a given type, like 'Customer'.
ARCCore.IKType.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.ITypeDescriber	ARCCore	Class	Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.PK	ARCCore	Class	PK = AgoRapide PropertyKey.
ARCCore.PK.TryGetEnum	ARCCore	ClassMember	Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PK.GetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.PK.TryGetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute-.
ARCCore.PK.PackParseResultForStorageInEntityObject	ARCCore	ClassMember	Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.PackObjectForStorageInEntityObject	ARCCore	ClassMember	See -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.FromEnum	ARCCore	ClassMember	Returns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.BuildFromStringCache	ARCCore	ClassMember	Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.GetTypeMapping	ARCCore	ClassMember	Returns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.GetObligatoryValuesForEntityType	ARCCore	ClassMember	Returns all obligatory values (based on -IsObligatory-)
ARCCore.PK.Equals	ARCCore	ClassMember	Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.CorrespondingClass	ARCCore	ClassMember	Returns -CorrespondingClass- based on -__enum-.
ARCCore.PK.ValidatorAndParser	ARCCore	ClassMember	Validates and parses a value.
ARCCore.PK.Cleaner	ARCCore	ClassMember	Cleanup of values, to be used before value is attempted validated.
ARCCore.PK.AllEnums	ARCCore	ClassMember	All enums for the whole application.
ARCCore.PKHTMLAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKHTMLAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKHTMLAttribute.Encoder	ARCCore	ClassMember	See -Encoder-.
ARCCore.PKHTMLAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKRelAttribute.ForeignEntity	ARCCore	ClassMember	See -ForeignEntity-.
ARCCore.PKRelAttribute.EnforceReferentialIntegrity	ARCCore	ClassMember	See -EnforceReferentialIntegrity-.
ARCCore.PKRelAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute	ARCCore	Class	Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PKTypeAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.StandardValidatorAndParser	ARCCore	ClassMember	Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri.
ARCCore.PKTypeAttribute.StandardCleaner	ARCCore	ClassMember	Returns a cleaner for well known types like bool
ARCCore.PKTypeAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKTypeAttribute.Type	ARCCore	ClassMember	See -Type-.
ARCCore.PKTypeAttribute.Cardinality	ARCCore	ClassMember	See -Cardinality-.
ARCCore.PKTypeAttribute.DefaultValue	ARCCore	ClassMember	See -DefaultValue-.
ARCCore.StreamProcessor.ReadStorageFile	ARCCore	ClassMember	Reads one storage file from disk
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections	ARCCore	ClassMember	Not relevant for -CoreDB-.
ARCCore.PKTypeAttribute.IsObligatory	ARCCore	ClassMember	See -IsObligatory-.
ARCCore.StreamProcessor.OutsideLocalReceiver	ARCCore	ClassMember	The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class.
ARCCore.StreamProcessor.StartTCPIPCommunication	ARCCore	ClassMember	Starts communicating over TCP/IP.
ARCCore.PKTypeAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin	ARCCore	ClassMember	Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.StreamProcessor.ReceiveAndDistribute	ARCCore	ClassMember	Process all messages in receive queue.
ARCCore.IP	ARCCore	Class	IP = IProperty.
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp	ARCCore	ClassMember	Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.
ARCCore.StreamProcessor.AddTimestampAsRequired	ARCCore	ClassMember	Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.IP.TryGetV Overload2	ARCCore	ClassMember	The actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.StorageFile	ARCCore	Class	Implemented only in order to store some ideas about -Hash-.
ARCCore.StreamProcessor.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.Inc	ARCCore	ClassMember	Increments given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.Subscription	ARCCore	Class	A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner.
ARCCore.PropertyStreamLineWithOrigin	ARCCore	Class	The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source).
ARCCore.IP.Dec	ARCCore	ClassMember	Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.Subscription.FromTime	ARCCore	ClassMember	TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?).
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver	ARCCore	ClassMember	Means 'send to local receiver regardless of origin'.
ARCCore.IP.Log	ARCCore	ClassMember	The 'final' overload of -Log- that is called by the other overloads.
ARCCore.Subscription.IsMatch Overload2	ARCCore	ClassMember	Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements).
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing	ARCCore	ClassMember	Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client).
ARCCore.IP.LogExecuteTime	ARCCore	ClassMember	Times the execution of the given function and logs details about elapsed time.
ARCCore.Subscription.SyntaxHelp	ARCCore	ClassMember	'+*' Subscribe to everything in database.
ARCCore.StorageFile.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.TryGetP Overload1	ARCCore	ClassMember	Gets a single property for this object
ARCCore.Subscription.IsAdd	ARCCore	ClassMember	Corresponds to whether value starts with a plus sign, '+' or not.
ARCCore.StorageFile.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.ToPropertyStream	ARCCore	ClassMember	Turns object into a -PropertyStream-
ARCCore.UtilCore.AssertCurrentlyStartingUp	ARCCore	ClassMember	Normally called from non-thread safe methods that should be run single-threaded at application startup only.
ARCCore.Subscription.ToTime	ARCCore	ClassMember	TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?).
ARCCore.IP.ToJSONSerializeable	ARCCore	ClassMember	Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.UtilCore.DoubleTryParse	ARCCore	ClassMember	Note that treats ',' (comma) as decimal point (not as thousands separator).
ARCCore.Subscription.IsMatch Overload1	ARCCore	ClassMember	Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line.
ARCCore.IP.GetValueForJSONSerializer	ARCCore	ClassMember	Makes the following modifications to the data:
ARCCore.UtilCore.GetExeptionDetails	ARCCore	ClassMember	Gives as much information about exception as possible.
ARCCore.Subscription.IsRemove	ARCCore	ClassMember	Corresponds to whether value starts with a minus sign, '+' or not.
ARCCore.IP.TrySetP	ARCCore	ClassMember	Set property regardless of whether exists or not.
ARCCore.UtilCore.DateTimeTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore	ARCCore	Class	Utility methods for -ARCCore-.
ARCCore.IP.TryGetV Overload1	ARCCore	ClassMember	The actual 'unpacking' of the object.
ARCCore.TValue	ARCCore	Class	Placeholder for any class type suitable as generic type parameter -PValue-.
ARCCore.UtilCore.EnumTryParse	ARCCore	ClassMember	Same as the inbuilt .NET method -TryParse- but with some additional checks.
ARCCore.IP.DeepCopy	ARCCore	ClassMember	Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException	ARCCore	Class	Helps to clean up any confusion about which -BaseAttribute- to use in a given concept.
ARCCore.UtilCore.TryGetTypeFromStringNoCache	ARCCore	ClassMember	See -TryGetTypeFromStringFromCache- for documentation.
ARCCore.IP.AddPV	ARCCore	ClassMember	Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.PK+PKBoolPair.TrulyInitialized	ARCCore	ClassMember	Not used currently (May 2020). Useful for debugging purposes
ARCCore.UtilCore.TryGetTypeFromStringFromCache	ARCCore	ClassMember	Corresponding method for creating string-representation of type is -ToStringDB-.
ARCCore.IP.IsValid	ARCCore	ClassMember	Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.StreamProcessor+StorageFile	ARCCore	Class
ARCCore.UtilCore.GetExceptionChainAsString	ARCCore	ClassMember	Follows the chain of InnerException and returns types as comma-separated string
ARCCore.IP.Item	ARCCore	ClassMember	Offers string-based direct indexing.
ARCCore.StreamProcessor+StorageFile.Length	ARCCore	ClassMember	Wrongly placed. Belongs to each individual revision file.
ARCCore.PK+BasePKAttributeNotFoundException<T>	ARCCore	Class	Explains how to implement a given -BasePKAttribute- for an enum
ARCCore.IP.Keys	ARCCore	ClassMember	Returns all the keys for this instance.
ARCCore.StreamProcessor+StorageFile.Properties	ARCCore	ClassMember	Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on.
ARCCore.PK+PKBoolPair	ARCCore	Class	Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection).
ARCCore.IP.Values	ARCCore	ClassMember	Returns all the values (all the properties) for this instance.
ARCCore.BaseAttributeP.LongDescription	ARCCore	EnumMember	The long (detailed) description for the attribute.
ARCCore.StreamProcessor+StorageFile.Filepath	ARCCore	ClassMember	Complete path to file
ARCCore.IP.Logger	ARCCore	ClassMember	Describes a logger.
ARCCore.ClassAttributeP	ARCCore	Enum	Describes class -ClassAttribute-.
ARCCore.StreamProcessor+StorageFile.Filename	ARCCore	ClassMember	Filename: Main file name, like 2020-04-03 08:42
ARCCore.IP.AllIPDerivedTypes	ARCCore	ClassMember	All relevant -IP--derived types for the whole application.
ARCCore.ClassAttributeP.SubTypes	ARCCore	EnumMember	Direct and indirect sub types of this class.
ARCCore.BaseAttributeP	ARCCore	Enum	Describes class -BaseAttribute-.
ARCCore.IP.AllIPDerivedTypesWithPKEnum	ARCCore	ClassMember	All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.ClassAttributeP.Interfaces	ARCCore	EnumMember	All interfaces that this class and its base classes implement
ARCCore.BaseAttributeP.Description	ARCCore	EnumMember	The description for the attribute, like this description
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific	ARCCore	ClassMember	All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-.
ARCCore.ClassAttributeP.InterfacesDirectlyImplemented	ARCCore	EnumMember	All interfaces that this class directly implements.
ARCCore.ClassAttributeP.AssemblyName	ARCCore	EnumMember	The assembly in which this class resides.
ARCCore.PCollection	ARCCore	Class	A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.ClassAttributeP.CorrespondingEnumType	ARCCore	EnumMember	Only relevant when implements -IP-.
ARCCore.ClassAttributeP.ClassNamespace	ARCCore	EnumMember	The namespace for -ClassType-.
ARCCore.PCollection.TrySetPP	ARCCore	ClassMember	Replaces default interface method -TrySetPP-.
ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage	ARCCore	EnumMember	Only relevant when implements -IP- and when a -CorrespondingEnumType- is found.
ARCCore.ClassAttributeP.ClassType	ARCCore	EnumMember	The actual type that we are a -ClassAttribute- for
ARCCore.PCollection.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.ClassMemberAttributeP	ARCCore	Enum	Describes class -ClassMemberAttribute-.
ARCCore.ClassAttributeP.BaseTypes	ARCCore	EnumMember	The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object'
ARCCore.PCollection.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.EnumAttributeP.CorrespondingClass	ARCCore	EnumMember	Only relevant when -PropertyKeyEnum-.
ARCCore.ClassMemberAttributeP.DeclaringType	ARCCore	EnumMember	The actual MemberInfo.DeclaringType.
ARCCore.PCollection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.EnumMemberAttributeP	ARCCore	Enum	Describes class -EnumMemberAttribute-.
ARCCore.ClassMemberAttributeP.MethodName	ARCCore	EnumMember	The actual MemberInfo.Name.
ARCCore.IGetKeysEqualToValue	ARCCore	Class	Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.EnumMemberAttributeP.EnumType	ARCCore	EnumMember	The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for
ARCCore.ClassMemberAttributeP.MethodSignature	ARCCore	EnumMember	The actual MemberInfo.ToString.
ARCCore.PConcurrent	ARCCore	Class	A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.EnumMemberAttributeP.EnumMember	ARCCore	EnumMember	The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for
ARCCore.EnumAttributeP	ARCCore	Enum	Describes class -EnumAttribute-.
ARCCore.PConcurrent.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ARConcepts.MemoryConsumption	ARCCore	EnumMember	A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption.
ARCCore.EnumAttributeP.AssemblyName	ARCCore	EnumMember	The assembly in which this class resides.
ARCCore.IIKII.PackParseResultForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.ARConcepts.Indexing	ARCCore	EnumMember	In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-.
ARCCore.EnumAttributeP.EnumNamespace	ARCCore	EnumMember	The namespace for -EnumType-.
ARCCore.IIKII.PackObjectForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.ARConcepts.CoreDBSynchronization	ARCCore	EnumMember	The concept of how multiple -CoreDB- instances synchronizes their data.
ARCCore.EnumAttributeP.EnumType	ARCCore	EnumMember	The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for
ARCCore.PRich	ARCCore	Class	Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.ARConcepts.SingleThreadedCode	ARCCore	EnumMember	Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-).
ARCCore.EnumAttributeP.AREnumType	ARCCore	EnumMember	Note that will default to -__invalid- if not explicit set.
ARCCore.PRich.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages	ARCCore	EnumMember	The abstraction level in AgoRapide is very high.
ARCCore.ARConcepts.AgoRapideHistory	ARCCore	EnumMember	AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language).
ARCCore.PRich.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ARConcepts.ExposingApplicationState	ARCCore	EnumMember	The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool.
ARCCore.ARConcepts.AdHocQuery	ARCCore	EnumMember	The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-.
ARCCore.PValue<T>	ARCCore	Class	Single value storage.
ARCCore.ARConcepts.LinkInsertionInDocumentation	ARCCore	EnumMember	Documentation with links is much easier to read.
ARCCore.ARConcepts.StandardAgoRapideCode	ARCCore	EnumMember	Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code)
ARCCore.PValue<T>.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.ARConcepts.TryPatternAndNull	ARCCore	EnumMember	AgoRapide uses non-nullable reference types as default throughout the system
ARCCore.ARConcepts.ApplicationSpecificCode	ARCCore	EnumMember	Code specific for an end-application.
ARCCore.PValue<T>.TryGetV	ARCCore	ClassMember	Supports duck typing.
ARCCore.ARNodeType	ARCCore	Enum	Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-.
ARCCore.ARConcepts.DataRetention	ARCCore	EnumMember	The concept of when to delete old data (if deemed necessary).
ARCCore.ActualConnection.SetMyUpdatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.ARNodeType.CoreDB	ARCCore	EnumMember	A node containing the core or central database.
ARCCore.ARConcepts.NoRealDeletion	ARCCore	EnumMember	AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data).
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.ARNodeType.ArmDB	ARCCore	EnumMember	A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only)
ARCCore.ARConcepts.ManyToManyRelations	ARCCore	EnumMember	-ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table).
ARCCore.ActualConnection.SetUpToDatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-. Not used by -Client-.
ARCCore.ARNodeType.Client	ARCCore	EnumMember	An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-.
ARCCore.ARConcepts.Documentation	ARCCore	EnumMember	Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible.
ARCCore.ActualConnection.InitializeOutgoingConnection	ARCCore	ClassMember	Relevant for -Outgoing-.
ARCCore.PKTypeAttributeP.DefaultValue	ARCCore	EnumMember	The default value.
ARCCore.AREnumType	ARCCore	Enum	Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-.
ARCCore.ActualConnection.Communicate	ARCCore	ClassMember	Common for both -Incoming- and -Outgoing-.
ARCCore.PKTypeAttributeP.Cardinality	ARCCore	EnumMember	Describes how multiple instances of a property is supposed to be handled.
ARCCore.AREnumType.PropertyKeyEnum	ARCCore	EnumMember	Designates enums that describe relevant values for an 'entity' object like 'Customer'.
ARCCore.ActualConnection.LogAndSendErrorConditionData	ARCCore	ClassMember	Called when a serious error condition has been discovered and connection should be terminated.
ARCCore.PKTypeAttributeP.IsObligatory	ARCCore	EnumMember	True means value is obligatory.
ARCCore.AREnumType.OrdinaryEnum	ARCCore	EnumMember	Designates "Ordinary" enums used for indicating range of valid values for a given key

Generated 2025-11-08 15:57:37.391 UTC