[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 85 > < TAKE 500 >
500 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.CardinalityExtensions | ARCCore | Class | |
| ARCCore.EnumAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.ClassAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.CardinalityExtensions.IsMultiple | ARCCore | ClassMember | Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage. |
| ARCCore.EnumMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.EnumAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.Extensions.ToStringVeryShort | ARCCore | ClassMember | Returns same as -ToStringShort- but without any generics information at all. |
| ARCCore.EnumMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.EnumMemberAttribute | ARCCore | Class | Describes an enum's value. |
| ARCCore.Extensions.Use | ARCCore | ClassMember | Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times |
| ARCCore.Extensions.ToStringDB | ARCCore | ClassMember | Gives the minimum representation of type as string suitable for later reconstruction by -GetType-. |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.Extensions.AddValue | ARCCore | ClassMember | Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists |
| ARCCore.Extensions.ForEach | ARCCore | ClassMember | Useful when we want to write collection.ForEach( ... ) instead of |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.Extensions.Result | ARCCore | ClassMember | Returns heading plus return-value of function (calls function). If function == null then empty string is returned |
| ARCCore.Extensions.Single | ARCCore | ClassMember | Same as inbuilt LINQ's Single except that gives a more friendly exception message |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.Extensions.ToStringDateAndTime | ARCCore | ClassMember | Uses format 'yyyy-MM-dd HH:mm:ss.fff'. |
| ARCCore.Extensions.SingleOrDefault | ARCCore | ClassMember | Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.IKIP.AssertTypeIntegrity | ARCCore | ClassMember | See -TryAssertTypeIntegrity- for documentation. |
| ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
| ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.IP.TryGetP Overload1 | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.IP.AddPV | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.IP.TryGetP Overload2 | ARCCore | ClassMember | Note that not relevant for single-value properties like -PValue-. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.IP.EnumeratorReturnsEmptyCollection | ARCCore | ClassMember | Hint for how to avoid calling enumerator.Count() when all you need is to decide if collection is empty or not. |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Makes the following modifications to the data: |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.PExact<EnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.PExact<EnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.PExact<EnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.ARComponents | ARCCore | Enum | Contains short descriptions of the different 'official' AgoRapide components. |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.ARConcepts.MemoryConsumption | ARCCore | EnumMember | A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption. |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ARConcepts.Indexing | ARCCore | EnumMember | In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-. |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCCore.ARConcepts.LinkInsertionInDocumentation | ARCCore | EnumMember | Documentation with links is much easier to read. |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCCore.ARConcepts.TryPatternAndNull | ARCCore | EnumMember | AgoRapide uses non-nullable reference types as default throughout the system |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCCore.AREnumType | ARCCore | Enum | Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-. |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCCore.AREnumType.PropertyKeyEnum | |||
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCCore.AREnumType.OrdinaryEnum | ARCCore | EnumMember | Designates "Ordinary" enums used for indicating range of valid values for a given key |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCCore.AREnumType.DocumentationOnlyEnum | ARCCore | EnumMember | Designates enums that provide a central repository of explanation of terms that are not present in the C# code. |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCCore.PP.Valid | ARCCore | EnumMember | Timestamp when property was last known to be (still) valid |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| ARCCore.PP.Vid | ARCCore | EnumMember | Validator id, that is entity which set -Valid- for this property. |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| ARCCore.PP.Invalid | ARCCore | EnumMember | Timestamp when property was invalidated / 'deleted'. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCCore.PP.Iid | ARCCore | EnumMember | Invalidator id, that is entity which set -Invalid- for this property (or removed / 'undid' the invalidation by setting the value to '0001-01-01'). |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| ARCCore.PP.ExceptionText | ARCCore | EnumMember | General property for logging of exceptions, usually set through -HandleException-. |
| ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
| ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
| ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
| ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
| ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
| ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
| ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
| ARCDoc.Apple.GetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCDoc.Apple.TryGetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCDoc.Apple.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCDoc.Apple.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
| ARCDoc.Apple.Name | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
| ARCDoc.Banana | ARCDoc | Class | Implements -IP- directly and uses traditional property storage for optimum -MemoryConsumption- efficiency. |
| ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
| ARCDoc.Banana.Name | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
| ARCDoc.Banana.Colour | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
| ARCDoc.Demonstrator | ARCDoc | Class | Demonstrates various concepts from -ARCCore-, especially -PropertyAccess-. |
| ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessApple | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Apple- class. |
| ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessOrange | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Orange- class. |
| ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessBanana | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Banana- class. |
| ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
| ARCDoc.DocFrag.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
| ARCDoc.DocFrag.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
| ARCDoc.DocFrag.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessorP.CountOutgoingConnections | |||
| ARCDoc.DocFragCollection | ARCDoc | Class | Contains a collection of -DocFrag- objects. |
| ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
| ARCDoc.DocFragCollection.Create | ARCDoc | ClassMember | Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies. |
| ARCCore.StreamProcessorP.CountReceiveLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- with -HasLocalOrigin-. |
| ARCDoc.DocFragCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessorP.CountReceiveNonLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- not with -HasLocalOrigin-. |
| ARCDoc.DocFragCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StorageFileP | ARCCore | Enum | Describes class -StorageFile-. |
| ARCDoc.DocLink | ARCDoc | Class | Describes to where a single HTML link points. |
| ARCDoc.Demonstrator.DemonstrateITypeDescriber | ARCDoc | ClassMember | Demonstrates use of -ITypeDescriber- for describing single-property values. |
| ARCDoc.DocLink.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Demonstrator.DemonstratePRichHierarchicalStorage | ARCDoc | ClassMember | Demonstrates use of -PRich-, how it receives -PropertyStream--lines and builds up a strongly typed hierarchical object storage. |
| ARCDoc.DocLink.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Demonstrator.DemonstratePropertyStream | ARCDoc | ClassMember | Demonstrates use of -PropertyStream- by generating local data (documentation data) and writing locally to console. |
| ARCDoc.DocLink.Location | ARCDoc | ClassMember | Copy of -Location-. |
| ARCDoc.Demonstrator.DemonstrateBareBonesClient | ARCDoc | ClassMember | Demonstrates adding -PropertyStream--lines to -CoreDB- without using ANY AgoRapide component, only standard TCP/IP functionality in .NET. |
| ARCDoc.DocLink.Filename | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.Demonstrator.DemonstrateLogConsole | ARCDoc | ClassMember | Demonstrates a quite simple log console. |
| ARCDoc.DocLink.LinkWordHTML | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.Demonstrator.DemonstrateStreamProcessorAsClient | ARCDoc | ClassMember | Demonstrates use of -StreamProcessor- as a general client. |
| ARCDoc.DocLink.LinkWordHTMLWithHyphens | ARCDoc | ClassMember | -LinkWordHTML- with '-' (minus sign / hyphen) prepended and appended. |
| ARCDoc.Orange | ARCDoc | Class | Inherits -PExact- for probably the best compromise between memory consumption and easy of development. |
| ARCDoc.DocLink.LinkWordHTMLBeforeLt | ARCDoc | ClassMember | If -LinkWordHTML contains '<' (really '<') (for generic types, like 'PValue<TValue>') then this will contain the part before '<' like 'PValue'. |
| ARCDoc.Orange.Name | ARCDoc | ClassMember | See -Name- for more information. |
| ARCDoc.DocLink.LinkWordHTMLBeforeLtWithHyphens | ARCDoc | ClassMember | -LinkWordHTMLBeforeLt- with '-' (minus sign / hyphen) prepended and appended. |
| ARCDoc.Orange.Storage | ARCDoc | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCDoc.DocLink.AHrefEndPart | ARCDoc | ClassMember | 'Filename.Encoded + "> + LinkWordHTML + </a>' |
| ARCDoc.SomeAppComponent | ARCDoc | Class | Demonstrates how also your actual application classes, not only your data classes, should implement -IP-. |
| ARCDoc.DocLinkCollection | ARCDoc | Class | Contains a collection of -DocLink- objects. |
| ARCDoc.SomeAppComponent.MethodC | ARCDoc | ClassMember | Note structured format in logging. |
| ARCDoc.DocLinkCollection.Create | ARCDoc | ClassMember | Notes all locations and their positions in the hierarchical directory structure. |
| ARCDoc.SomeAppComponent.MethodD | ARCDoc | ClassMember | Same as MethodC- but returns data ('Func<string>()' instead of 'Action()') |
| ARCDoc.DocLinkCollection.InsertLinks | ARCDoc | ClassMember | Does -LinkInsertionInDocumentation- on the given HTML content. |
| ARCDoc.SomeAppComponent.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocLinkCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFrag | ARCDoc | Class | DocFrag = Document fragment. |
| ARCDoc.DocLinkCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFrag.Create Overload1 | ARCDoc | ClassMember | Creates a -DocFrag- object representing an assembly or a namespace. |
| ARCDoc.DocLinkResolution | ARCDoc | Class | Contains a resolution page for a link word which has duplicate 'targets' (pointing to multiple -DocLink- instances). |
| ARCDoc.DocFrag.Create Overload2 | ARCDoc | ClassMember | Creates a -DocFrag- object representing a class, class member, enum or enum member. |
| ARCDoc.DocLinkResolution.ToHTMLSimpleSingle | ARCDoc | ClassMember | Gives a friendly description about possible targets for LinkWord-. |
| ARCDoc.DocLinkResolution.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DummyEnum.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocLinkResolution.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DummyEnum.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocLinkResolutionCollection | ARCDoc | Class | Contains a collection of -DocLinkResolution- objects. |
| ARCDoc.Extensions | ARCDoc | Class | Contains various extension methods for -IP- and -IKIP- related to documentating / reporting / HTML. |
| ARCDoc.DocLinkResolutionCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Extensions.ToHTMLSimpleSingleRecursive | ARCDoc | ClassMember | Calls -ToHTMLSimpleSingle- recursively. |
| ARCDoc.DocLinkResolutionCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Extensions.ToHTMLSimpleSingle | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter. |
| ARCDoc.Documentator | ARCDoc | Class | General class for documenting AgoRapide and also your own -ApplicationSpecificCode-. |
| ARCDoc.Extensions.ToHTMLSimpleSingleInternal | ARCDoc | ClassMember | Hack in order to escape check for direct implementation in actual class of -ToHTMLSimpleSingle- in -ToHTMLSimpleSingle-. |
| ARCDoc.Documentator.CreateAndInsert | ARCDoc | ClassMember | Creates an instance of -Documentator- with a natural hierarchical representation of documentation attributes found in the given assemblies. |
| ARCDoc.Extensions.ToHTMLSimpleAsTableRow | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter as a single two column row (Key, Value) in a table. |
| ARCDoc.Documentator.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCDoc.Extensions.DescribeValue | ARCDoc | ClassMember | Describes the value contained withing an -IKIP- (-P-). |
| ARCDoc.Documentator.CreateHTOCStandard | ARCDoc | ClassMember | Creates a 'standard' table of contents, structured by assembly and each assembly divided into 'Class' and 'Enum'. |
| ARCDoc.Documentator.CreateHTOCNamespace | ARCDoc | ClassMember | Creates a table of contents structured by namespace |
| ARCDoc.Documentator.CreateHTOCInheritance | ARCDoc | ClassMember | Creates a table of contents structured by inheritance (classes and interfaces only, not members). |
| ARCDoc.Documentator.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Documentator.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Documentator.DocLinks | ARCDoc | ClassMember | Set by -CreateAndInsert-. |
| ARCDoc.Documentator.DocLinkResolutionLocation | ARCDoc | ClassMember | Default position within the global storage context of doc link resolution pages. |
| ARCDoc.DummyEnum | ARCDoc | Class | TODO: Document better what this is for (and change name) |
| ARCDoc.HLocationCollection.WriteAllContentHTMLToDisk | ARCDoc | ClassMember | Writes all -HLocation- results to a hierarhical folder structure as static HTML files with (optionally) -LinkInsertionInDocumentation-. |
| ARCDoc.HLocationCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HLocationCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HTOC | ARCDoc | Class | HTOC = Hierarchical table of contents. |
| ARCDoc.HTOC.Create | ARCDoc | ClassMember | Structures content hierarchically according to the criteria for each level. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload2 | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload1 | ARCDoc | ClassMember | Use this method in any class where a table-of-contents type of view is desireable |
| ARCDoc.HTOC.CreateInitialContent | ARCDoc | ClassMember | Helper method for creation of a -FilterBranch-. |
| ARCDoc.HTOC.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HTOC.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HTOC.HTOCContentThisLevelKey | ARCDoc | ClassMember | The key used for storing the actual content at this level. |
| ARCDoc.PKDocAttribute | ARCDoc | Class | Describes documentation and presentation of a property. |
| ARCDoc.PKDocAttribute.Initialize | ARCDoc | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.PKDocAttribute.TryRemoveP | ARCDoc | ClassMember | Should probably never be used. |
| ARCDoc.PKDocAttribute.PriorityOrder | ARCDoc | ClassMember | |
| ARCDoc.PKDocAttribute.IsDefault | ARCDoc | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.DocFragP | ARCDoc | Enum | Describes class -DocFrag-. |
| ARCDoc.DocFragP.DocFragType | ARCDoc | EnumMember | |
| ARCDoc.DocFragP.Assembly | ARCDoc | EnumMember | Name of the assembly in which this fragment resides. |
| ARCDoc.DocFragP.Namespace | ARCDoc | EnumMember | Namespace in which this fragment resides. |
| ARCDoc.DocFragP.ParentNamespace | ARCDoc | EnumMember | Parent namespace of namespace in which this fragment resides. |
| ARCDoc.DocFragP.Type | ARCDoc | EnumMember | Type of class or enum which this fragment describes (also relevant for class or enum member). |
| ARCDoc.DocFragP.Name | ARCDoc | EnumMember | As simple a name as practical usable. Often not unique within a greater context. |
| ARCDoc.DocFragP.IsInherited | ARCDoc | EnumMember | Relevant for class members. TRUE if method is inherited from a base type. |
| ARCDoc.DocFragP.IsInheritedDoc | ARCDoc | EnumMember | Relevant for class members (methods). |
| ARCDoc.DocFragP.Lines | ARCDoc | EnumMember | Number of lines of text in -Description- and -LongDescription- for this fragment. |
| ARCDoc.DocFragP.Attribute | ARCDoc | EnumMember | The -BaseAttribute- or -PK- from which this -DocFrag- originates. |
| ARCDoc.DocFragType | ARCDoc | Enum | Type of documentation fragment, like -Assembly-, -Class- or -ClassMember-. |
| ARCDoc.DocFragType.Assembly | ARCDoc | EnumMember | |
| ARCDoc.DocFragType.Namespace | ARCDoc | EnumMember | |
| ARCDoc.DocFragType.Class | ARCDoc | EnumMember | Does also include interfaces. |
| ARCDoc.DocFragType.ClassMember | ARCDoc | EnumMember | |
| ARCDoc.PKDocAttributeP | ARCDoc | Enum | Describes class -PKDocAttribute-. |
| ARCDoc.PKDocAttributeP.PriorityOrder | ARCDoc | EnumMember | Used by -DescribeValue-. |
| ARCDoc.PriorityOrder | ARCDoc | Enum | Used for general sorting / prioritizing when showing properties for an entity. |
| ARCDoc.PriorityOrder.NotImportant | ARCDoc | EnumMember | |
| ARCDoc.PriorityOrder.Important | ARCDoc | EnumMember | |
| Assembly ARCQuery | Assembly | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| ARCQuery.BinaryOperatorKey | ARCQuery | Class | Offers expressions with operators like +, -, * and /. |
| ARCQuery.BinaryOperatorKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.BinaryOperatorKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.BinaryOperatorKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.BinaryOperatorKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.BinaryOperatorKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.CompoundInvalidKey | ARCQuery | Class | Used as a practical solution in order to know that a given key has been attemped parsed, but was not valid. |
| ARCQuery.CompoundInvalidKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.CompoundInvalidKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.CompoundInvalidKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.ForeignKey.AggregateKeys | ARCQuery | ClassMember | Aggregations to be used on the multiple foreign entity values that are found when one of the -Steps- are -ToMany-. |
| ARCQuery.ForeignKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.ForeignKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.ForeignKey.IPRelationsKeysPointingTo | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types with foreign keys pointing to that entity type. |
| ARCQuery.ForeignKey.IPRelationsKeysPointingFrom | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types which that entity type points to. |
| ARCQuery.MemberEntityKey | ARCQuery | Class | Can find value for entity which is member of entity being queried. |
| ARCQuery.MemberEntityKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.MemberEntityKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
| ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
| ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
| ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
| ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
| ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
| ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
| ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
| ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
| ARCCore.InvalidTypeException | ARCCore | Class | |
| ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
| ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
| ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
| ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
| ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
| ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
| ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
| ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
| ARCCore.ARConcepts.PropertyAccess | ARCCore | EnumMember | The general mechanism for accessing properties of objects in AgoRapide. |
| ARCCore.ARConcepts.AvoidingRepetition | ARCCore | EnumMember | Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide. |
| ARCCore.ARConcepts.AgoRapideHistory | ARCCore | EnumMember | AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language). |
| ARCCore.ARConcepts.AdHocQuery | ARCCore | EnumMember | The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-. |
| ARCCore.ARConcepts.StandardAgoRapideCode | ARCCore | EnumMember | Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code) |
| ARCCore.ARConcepts.ApplicationSpecificCode | ARCCore | EnumMember | Code specific for an end-application. |
| ARCCore.PSPrefix | ARCCore | Enum | Describes some recommended prefixed to use in a -PropertyStreamLine-. |
| ARCCore.PSPrefix.dt | ARCCore | EnumMember | Data, like dt/ |
| ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command, like cmd/ |
| ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
| ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation, like doc/. |
| ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
| ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
| ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
| ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
| ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
| ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
| ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
| ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
| ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
| ARCCore.StorageFileP.Filename | ARCCore | EnumMember | |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCQuery.ForeignKey | ARCQuery | Class | Can find related values, through compound field names. |
| ARCQuery.ForeignKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.ForeignKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.ForeignKey.AllForeignKeysForEntityType | ARCQuery | ClassMember | Returns all possible foreign keys relevant for the given entity type, like for Order: 'Customer.FirstName' and 'Customer.LastName'. |
| ARCQuery.ForeignKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.ForeignKey.Steps | ARCQuery | ClassMember | The actual -ForeignKeySingleStep- leading to the -ForeignField-. |
| ARCQuery.ForeignKey.StepsAreOnlyDirectionToOne | ARCQuery | ClassMember | If TRUE then -TryGetPInternal) will use much simpler code without collections and parallell executions. |
| ARCQuery.ForeignKey.ForeignField | ARCQuery | ClassMember | The actual field in the final foreign entity to return value for. |
| ARCQuery.FunctionKeyAggregateMin | ARCQuery | Class | Calculates the minimum value of the given properties. |
| ARCQuery.FunctionKeyAggregateMin.SyntaxHelp | ARCQuery | ClassMember | 'Min()' |
| ARCQuery.FunctionKeyAggregateSum | ARCQuery | Class | Sums the given properties. |
| ARCQuery.FunctionKeyAggregateSum.SyntaxHelp | ARCQuery | ClassMember | 'Sum()' |
| ARCQuery.FunctionKey | ARCQuery | Class | Extracts data from an already existing value like extracting Year from a DateTime in 'Created.Year()'. |
| ARCQuery.FunctionKey.TryGetP Overload1 | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKey.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCQuery.FunctionKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCDoc.Extensions.ValueToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Value with description as a 'tooltip'. |
| ARCDoc.Extensions.KeyToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Key with description as a 'tooltip'. |
| ARCDoc.HLocation | ARCDoc | Class | Simple class describing the location of a single -IP- instance within some hierarhical context. |
| ARCDoc.HLocation.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HLocation.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HLocation.Content | ARCDoc | ClassMember | The Content object is not stored within the standard -IP--mechanism. |
| ARCDoc.HLocationCollection | ARCDoc | Class | Contains a collection of -HLocation- objects. |
| ARCDoc.HLocationCollection.Create | ARCDoc | ClassMember | Transforms the parameter (and recursively all contained objects) into a collection of -HLocation- objects. |
Generated 2026-11-04 07:24:13.809 UTC