[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 4 > < TAKE 248 >
248 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.ClassMemberAttribute | ARCCore | Class | Describes a member of a class (a method). |
| ARCCore.BasePKAttribute.GetAttributes | ARCCore | ClassMember | Note that illegal to call for other than -PropertyKeyEnum-. |
| ARCCore.BaseAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IPAttribute | ARCCore | Class | Describes -IP- classes (describes at class-level) |
| ARCCore.BasePKAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.BasePKAttribute | ARCCore | Class | The class containing the actual attributes used for -TaggingOfPropertyKeys-. |
| ARCCore.Extensions | ARCCore | Class | Contains a few general nice to have extensions methods. |
| ARCCore.ClassAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.BasePKAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.Extensions.ToStringDB | ARCCore | ClassMember | Gives the minimum representation of type as string suitable for later reconstruction by -GetType-. |
| ARCCore.ClassAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.ClassAttribute | ARCCore | Class | Describes a class. |
| ARCCore.Extensions.AddValue | ARCCore | ClassMember | Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists |
| ARCCore.ClassMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.ClassAttribute.GetAttribute | ARCCore | ClassMember | Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance) |
| ARCCore.Extensions.Single | ARCCore | ClassMember | Same as inbuilt LINQ's Single except that gives a more friendly exception message |
| ARCCore.EnumAttribute | ARCCore | Class | Describes an enum. |
| ARCCore.ClassAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
| ARCCore.EnumAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.ClassMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
| ARCCore.EnumMemberAttribute | ARCCore | Class | Describes an enum's value. |
| ARCCore.EnumAttribute.GetAttribute | ARCCore | ClassMember | Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance). |
| ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
| ARCCore.EnumMemberAttribute.GetAttribute | ARCCore | ClassMember | Note that illegal to call for -PropertyKeyEnum-. |
| ARCCore.EnumAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
| ARCCore.IKIP | ARCCore | Class | Container class for key (-IK-), and value (-IP-). |
| ARCCore.EnumMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
| ARCCore.IKIP.AssertTypeIntegrity | ARCCore | ClassMember | See -TryAssertTypeIntegrity- for documentation. |
| ARCCore.EnumMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.Extensions.ToStringShort | ARCCore | ClassMember | Returns a shorter representation than -ToStringDB-. |
| ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
| ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.Extensions.ToStringVeryShort | ARCCore | ClassMember | Returns same as -ToStringShort- but without any generics information at all. |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
| ARCCore.Extensions.KeysAsString | ARCCore | ClassMember | Gives a compressed overview of keys in a dictionary. Helpful for building exception messages. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
| ARCCore.Extensions.GetValue | ARCCore | ClassMember | Gives better error messages when reading value from directory if key does not exist |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.Extensions.ToStringDateAndTime | ARCCore | ClassMember | Uses format 'yyyy-MM-dd HH:mm:ss.fff'. |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.IKType | |||
| ARCCore.Extensions.ToStringWithMS | ARCCore | ClassMember | Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.IP.TryGetP Overload1 | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.IP.GetP | ARCCore | ClassMember | Gets a single property for this object. |
| ARCCore.IP.AddPV | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.IP.TryGetP Overload2 | ARCCore | ClassMember | Note that not relevant for single-value properties like -PValue-. |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Makes the following modifications to the data: |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.EnumeratorReturnsEmptyCollection | ARCCore | ClassMember | Hint for how to avoid calling enumerator.Count() when all you need is to decide if collection is empty or not. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PExact<EnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.PExact<EnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.PExact<EnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Offers for lookup of a type given its string representation. |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
Generated 2026-11-03 15:42:05.576 UTC