[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 31 > < TAKE 250 >

250 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.CardinalityExtensions.IsMultiple	ARCCore	ClassMember	Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.Extensions	ARCCore	Class	Contains a few general nice to have extensions methods.
ARCCore.Extensions.ToStringShort	ARCCore	ClassMember	Returns a shorter representation than -ToStringDB-.
ARCCore.Extensions.ToStringVeryShort	ARCCore	ClassMember	Returns same as -ToStringShort- but without any generics information at all.
ARCCore.Extensions.ToStringDB	ARCCore	ClassMember	Gives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.Extensions.ForEach	ARCCore	ClassMember	Useful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.KeysAsString	ARCCore	ClassMember	Gives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.Extensions.GetValue	ARCCore	ClassMember	Gives better error messages when reading value from directory if key does not exist
ARCCore.Extensions.Single	ARCCore	ClassMember	Same as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.SingleOrDefault	ARCCore	ClassMember	Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.Result	ARCCore	ClassMember	Returns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.Extensions.ToStringDateAndTime	ARCCore	ClassMember	Uses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.Extensions.ToStringWithMS	ARCCore	ClassMember	Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.IKIP	ARCCore	Class	Container class for key (-IK-), and value (-IP-).
ARCCore.IKIP.AssertTypeIntegrity	ARCCore	ClassMember	See -TryAssertTypeIntegrity- for documentation.
ARCCore.IKIP.TryAssertTypeIntegrity	ARCCore	ClassMember	Asserts that value is of correct type as specified by the key.
ARCCore.IK	ARCCore	Class	IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCoded	ARCCore	Class	Understands coded and unencoded variants of -IK-.
ARCCore.IKCoded.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.TryCheckValidEncodedValue	ARCCore	ClassMember	Checks if encoded value is valid.
ARCCore.IKCoded.FromCacheEncoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.FromCacheUnencoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.FromEncoded	ARCCore	ClassMember	Note how uses instance cache if already exists there.
ARCCore.IKCoded.TryEncode	ARCCore	ClassMember	Returns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.IKCoded.ToString	ARCCore	ClassMember	Returns -Encoded-'s string representation.
ARCCore.IKCoded.Encoded	ARCCore	ClassMember	This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKCoded.AllowedEncodedCharacters	ARCCore	ClassMember	The character set 'A...Za...z0...9-_().,='.
ARCCore.IKLong	ARCCore	Class	A more memory efficient alternative to -IKString-.
ARCCore.IKLong.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.IKString	ARCCore	Class	Index key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKString.FromString	ARCCore	ClassMember	Note how uses instance cache if already exists there
ARCCore.PK	ARCCore	Class	PK = AgoRapide PropertyKey.
ARCCore.PK.GetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.PK.TryGetEnum	ARCCore	ClassMember	Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PK.TryValidateAndParse	ARCCore	ClassMember	Parses the value according to specifications for this property key.
ARCCore.PK.TryGetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute-.
ARCCore.PK.PackParseResultForStorageInEntityObject	ARCCore	ClassMember	Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality	ARCCore	ClassMember	Called from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PK.FromEnum	ARCCore	ClassMember	Returns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.TryCleanValidateAndParse	ARCCore	ClassMember	Cleans and parses the value according to specifications for this property key.
ARCCore.PK.GetTypeMapping	ARCCore	ClassMember	Returns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.PackObjectForStorageInEntityObject	ARCCore	ClassMember	See -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.GetObligatoryValuesForEntityType	ARCCore	ClassMember	Returns all obligatory values (based on -IsObligatory-)
ARCCore.PK.TryGetFromTypeAndFieldName Overload3	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK..ctor	ARCCore	ClassMember	Constructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.Type	ARCCore	ClassMember	Returns type from -PKTypeAttribute-'s -Type-.
ARCCore.PK.GetAllPKForEntityType	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PK.Cardinality	ARCCore	ClassMember	Returns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.PK.GetAllPKForEntityTypeString	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PK.Cleaner	ARCCore	ClassMember	Cleanup of values, to be used before value is attempted validated.
ARCCore.PK.BuildFromStringCache	ARCCore	ClassMember	Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.AllEnums	ARCCore	ClassMember	All enums for the whole application.
ARCCore.PK.Equals	ARCCore	ClassMember	Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PKHTMLAttribute	ARCCore	Class	Contains pointer to HTML encoder for a property.
ARCCore.PK.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PKHTMLAttribute.Encode	ARCCore	ClassMember	Encodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PK.CorrespondingClass	ARCCore	ClassMember	Returns -CorrespondingClass- based on -__enum-.
ARCCore.PKHTMLAttribute.Encoder	ARCCore	ClassMember	See -Encoder-.
ARCCore.PK.ValidatorAndParser	ARCCore	ClassMember	Validates and parses a value.
ARCCore.PKHTMLAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PK.AllPKEnums	ARCCore	ClassMember	All -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PKLogAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PK.__enum	ARCCore	ClassMember	This information is also found as EnumMember.
ARCCore.PKLogAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKHTMLAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKRelAttribute	ARCCore	Class	Describes relationships between entities (between tables in RDBMS terms).
ARCCore.PKHTMLAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKRelAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IHTMLEncoder	ARCCore	Class	Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKRelAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKLogAttribute	ARCCore	Class	Explains how logging of changes to a property should be done.
ARCCore.PKRelAttribute.ForeignEntity	ARCCore	ClassMember	See -ForeignEntity-.
ARCCore.PKLogAttribute.DoNotLogAtAll	ARCCore	ClassMember	See -DoNotLogAtAll-.
ARCCore.PKTypeAttribute.Cardinality	ARCCore	ClassMember	See -Cardinality-.
ARCCore.PKLogAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute.DefaultValue	ARCCore	ClassMember	See -DefaultValue-.
ARCCore.IP.Logger	ARCCore	ClassMember	Describes a logger.
ARCCore.PKTypeAttribute.IsObligatory	ARCCore	ClassMember	See -IsObligatory-.
ARCCore.IP.AllIPDerivedTypes	ARCCore	ClassMember	All relevant -IP--derived types for the whole application.
ARCCore.PKTypeAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.AllIPDerivedTypesWithPKEnum	ARCCore	ClassMember	All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.IP	ARCCore	Class	IP = IProperty.
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific	ARCCore	ClassMember	All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-.
ARCCore.IP.TryGetV Overload2	ARCCore	ClassMember	The actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.P	ARCCore	Class	'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.IP.Inc	ARCCore	ClassMember	Increments given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.P.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.Dec	ARCCore	ClassMember	Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.P.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.Log	ARCCore	ClassMember	The 'final' overload of -Log- that is called by the other overloads.
ARCCore.ICreated	ARCCore	Class	A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.IP.LogExecuteTime	ARCCore	ClassMember	Times the execution of the given function and logs details about elapsed time.
ARCCore.PCollection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.TryGetP Overload1	ARCCore	ClassMember	Gets a single property for this object
ARCCore.IGetKeysEqualToValue	ARCCore	Class	Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.IP.ToPropertyStream	ARCCore	ClassMember	Turns object into a -PropertyStream-
ARCCore.PConcurrent	ARCCore	Class	A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.IP.ToJSONSerializeable	ARCCore	ClassMember	Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.PConcurrent.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.GetValueForJSONSerializer	ARCCore	ClassMember	Makes the following modifications to the data:
ARCCore.PII.TryGetV	ARCCore	ClassMember	Since value is stored in keys, we need to override this method.
ARCCore.IP.TrySetP	ARCCore	ClassMember	Set property regardless of whether exists or not.
ARCCore.PII.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.TryGetV Overload1	ARCCore	ClassMember	The actual 'unpacking' of the object.
ARCCore.IPII	ARCCore	Class	Future expansion, using different classes for storing, not only -PII-.
ARCCore.IP.DeepCopy	ARCCore	ClassMember	Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.IIKII	ARCCore	Class	Related to -PII-, property for storing individual items
ARCCore.IP.AddPV	ARCCore	ClassMember	Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.PValue<T>.ConvertObjectToString	ARCCore	ClassMember	Converts object to string.
ARCCore.IP.IsValid	ARCCore	ClassMember	Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.PValue<T>.ToString	ARCCore	ClassMember	Do no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.IP.Item	ARCCore	ClassMember	Offers string-based direct indexing.
ARCCore.PValue<T>.DeepCopy	ARCCore	ClassMember	Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy
ARCCore.IP.Keys	ARCCore	ClassMember	Returns all the keys for this instance.
ARCCore.PValue<T>..ctor	ARCCore	ClassMember	Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.IP.Values	ARCCore	ClassMember	Returns all the values (all the properties) for this instance.
ARCCore.PValueEmpty	ARCCore	Class	Represents the 'no value'.
ARCCore.IP.AllIPDerivedEntityCollectionClassesDict	ARCCore	ClassMember	All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection'
ARCCore.PValueEmpty.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract	ARCCore	ClassMember	All relevant -IP--derived types (except the interface -IP- itself) known to the application.
ARCCore.PValueEmpty.ToPropertyStream	ARCCore	ClassMember	Typicall return value could be something like
ARCCore.IP.AllIPDerivedTypesDict	ARCCore	ClassMember	Offers for lookup of a type given its string representation.
ARCCore.ActualConnection	ARCCore	Class	The actual connection, its internal state, queue for sending and so on.
ARCCore.IP.AllIPDerivedTypesDictIKType	ARCCore	ClassMember	Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.ActualConnection..ctor	ARCCore	ClassMember	Note parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.PCollection	ARCCore	Class	A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.MonkeyWrench	ARCCore	Class	Describes level of 'spanner-throwing' this connection shall contibute with
ARCCore.PCollection.TrySetPP	ARCCore	ClassMember	Replaces default interface method -TrySetPP-.
ARCCore.ClientUpdatePosition	ARCCore	Class	Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.PCollection.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.ClientUpdatePosition.Filename	ARCCore	ClassMember	Filename like '2020-04-03 08:42:22_R001'
ARCCore.PCollection.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ClientUpdatePosition.Index	ARCCore	ClassMember	Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.PExact<EnumType>	ARCCore	Class	Very -MemoryConsumption- efficient alternative to -PRich-.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty	ARCCore	ClassMember	Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.PExact<EnumType>..ctor	ARCCore	ClassMember	Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested	ARCCore	ClassMember	Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.PExact<EnumType>.Storage	ARCCore	ClassMember	Uses int-value of -__enum- minus 1 as index.
ARCCore.ClientUpdatePosition.IsGoBack	ARCCore	ClassMember	Has to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.PII	ARCCore	Class	PII = property for storing individual items.
ARCCore.PropertyStreamLine	ARCCore	Class	Has two main functions:
ARCCore.IIKII.PackParseResultForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.PropertyStreamLine.EncodeKeys	ARCCore	ClassMember	Encodes the key part of a -PropertyStreamLine-.
ARCCore.IIKII.PackObjectForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.PropertyStreamLine.EncodeValues	ARCCore	ClassMember	Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.PRich	ARCCore	Class	Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.PropertyStreamLine.EncodeKeyPart	ARCCore	ClassMember	Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PRich.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PropertyStreamLine.EncodeValuePart	ARCCore	ClassMember	Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PRich.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PropertyStreamLine.Decode	ARCCore	ClassMember	Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-.
ARCCore.PValue<T>	ARCCore	Class	Single value storage.
ARCCore.PropertyStreamLine.TryParseDirectToIP	ARCCore	ClassMember	Parses a series of -PropertyStreamLine- directly to the given type of -IP-.
ARCCore.PValue<T>.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.PropertyStreamLine.TryParseDirectToProperty	ARCCore	ClassMember	Parses direct to a given property value.
ARCCore.PValue<T>.TryGetV	ARCCore	ClassMember	Supports duck typing.
ARCCore.PropertyStreamLine.ParseAndStore	ARCCore	ClassMember	Note that throws exception if -TryParseAndStore- fails.
ARCCore.ActualConnection.SetMyUpdatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe	ARCCore	ClassMember	If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.PropertyStreamLine.StoreFailSafe	ARCCore	ClassMember	Stores if possible and fails silently.
ARCCore.ActualConnection.SetUpToDatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-. Not used by -Client-.
ARCCore.PropertyStreamLine.StoreFailure	ARCCore	ClassMember	Stores a 'ParseOrStoreFailure'-object.
ARCCore.ActualConnection.InitializeOutgoingConnection	ARCCore	ClassMember	Relevant for -Outgoing-.
ARCCore.PropertyStreamLine.TryStore	ARCCore	ClassMember	Stores the given -PropertyStreamLineParsed- in the given storage object.
ARCCore.ActualConnection.Communicate	ARCCore	ClassMember	Common for both -Incoming- and -Outgoing-.
ARCCore.PropertyStreamLine.AllowedKeyChars	ARCCore	ClassMember	Allowed characters in the Key-part of a -PropertyStreamLine-.
ARCCore.ActualConnection.LogAndSendErrorConditionData	ARCCore	ClassMember	Called when a serious error condition has been discovered and connection should be terminated.
ARCCore.PropertyStreamLine.AllowedValueChars	ARCCore	ClassMember	Allowed characters in the Value-part of a -PropertyStreamLine-.
ARCCore.ActualConnection.Send	ARCCore	ClassMember	Sends all messages in queue.
ARCCore.PropertyStreamLineParsed	ARCCore	Class	Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John.
ARCCore.ActualConnection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections	ARCCore	ClassMember	Not relevant for -CoreDB-.
ARCCore.ClientUpdatePosition.IsAtEndOfStream	ARCCore	ClassMember	Necessary in order to implement -AdHocQuery-.
ARCCore.StreamProcessor.StartTCPIPCommunication	ARCCore	ClassMember	Starts communicating over TCP/IP.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance	ARCCore	ClassMember	See also -ClientDatastoreIsEmpty.
ARCCore.StreamProcessor.ReceiveAndDistribute	ARCCore	ClassMember	Process all messages in receive queue.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance	ARCCore	ClassMember	See also -OnlyNewDataIsRequested.
ARCCore.StreamProcessor.AddTimestampAsRequired	ARCCore	ClassMember	Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.ConnectionInstruction	ARCCore	Class	The instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.StreamProcessor.ReadStorageFile	ARCCore	ClassMember	Reads one storage file from disk
ARCCore.ConnectionInstruction.Initialize	ARCCore	ClassMember	Initializes to sane values.
ARCCore.StreamProcessor.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ConnectionInstruction.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.StreamProcessor.OutsideLocalReceiver	ARCCore	ClassMember	The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class.
ARCCore.ConnectionInstruction.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PropertyStreamLineWithOrigin	ARCCore	Class	The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source).
ARCCore.Sharding	ARCCore	Class	Enables load-balancing by describing what data should be sent over a given connection.
ARCCore.Subscription.FromTime	ARCCore	ClassMember	TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?).
ARCCore.PropertyStreamLineParsed.ToString	ARCCore	ClassMember	Note relatively complex operation of 'restoring' original property stream line.
ARCCore.Subscription.ToTime	ARCCore	ClassMember	TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?).
ARCCore.PropertyStreamLineParsed.TryParse	ARCCore	ClassMember	Generate list of <(IK key, Type valueType)> together with value from value part.
ARCCore.Subscription.IsMatch Overload1	ARCCore	ClassMember	Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line.
ARCCore.PropertyStreamLineParsed.IsComment	ARCCore	ClassMember	Signifies that property stream line given for parsing started with '//' (two forward slashes).
ARCCore.Subscription.IsMatch Overload2	ARCCore	ClassMember	Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements).
ARCCore.PropertyStreamLineParsed.Keys	ARCCore	ClassMember	The keys part of the -PropertyStreamLine-, that is, everything before ' = '.
ARCCore.Subscription.SyntaxHelp	ARCCore	ClassMember	'+*' Subscribe to everything in database.
ARCCore.PropertyStreamLineParsed.Value	ARCCore	ClassMember	The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '.
ARCCore.Subscription.IsAdd	ARCCore	ClassMember	Corresponds to whether value starts with a plus sign, '+' or not.
ARCCore.StreamProcessor	ARCCore	Class	Implements the storage mechanism for AgoRapide.
ARCCore.Subscription.IsRemove	ARCCore	ClassMember	Corresponds to whether value starts with a minus sign, '+' or not.
ARCCore.StreamProcessor.CreateBareBonesInstance	ARCCore	ClassMember	Creates a bare-bones -StreamProcessor- instance.
ARCCore.UtilCore	ARCCore	Class	Utility methods for -ARCCore-.
ARCCore.StreamProcessor.Initialize	ARCCore	ClassMember	Initializes this instance of -StreamProcessor-
ARCCore.UtilCore.AssertCurrentlyStartingUp	ARCCore	ClassMember	Normally called from non-thread safe methods that should be run single-threaded at application startup only.
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin	ARCCore	ClassMember	Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.UtilCore.DoubleTryParse	ARCCore	ClassMember	Note that treats ',' (comma) as decimal point (not as thousands separator).
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver	ARCCore	ClassMember	Means 'send to local receiver regardless of origin'.
ARCCore.UtilCore.EnumTryParse	ARCCore	ClassMember	Same as the inbuilt .NET method -TryParse- but with some additional checks.
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp	ARCCore	ClassMember	Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.
ARCCore.UtilCore.TryGetTypeFromStringNoCache	ARCCore	ClassMember	See -TryGetTypeFromStringFromCache- for documentation.
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing	ARCCore	ClassMember	Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client).
ARCCore.UtilCore.TryGetTypeFromStringFromCache	ARCCore	ClassMember	Corresponding method for creating string-representation of type is -ToStringDB-.
ARCCore.StorageFile	ARCCore	Class	Implemented only in order to store some ideas about -Hash-.
ARCCore.UtilCore.GetExceptionChainAsString	ARCCore	ClassMember	Follows the chain of InnerException and returns types as comma-separated string
ARCCore.StorageFile.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.UtilCore.GetExeptionDetails	ARCCore	ClassMember	Gives as much information about exception as possible.
ARCCore.StorageFile.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.UtilCore.DateTimeTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.Subscription	ARCCore	Class	A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner.
ARCCore.UtilCore.ValidDateTimeFormats	ARCCore	ClassMember	'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd'
ARCCore.UtilCore.TimeSpanTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore.ValidTimeSpanFormats	ARCCore	ClassMember	'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff'
ARCCore.UtilCore.UseLocalTimeInsteadOfUTC	ARCCore	ClassMember	By default AgoRapide operates only with UTC time.
ARCCore.REx	ARCCore	Class	REx = 'TooDeepRecursiveDepthException'
ARCCore.UtilCore.DateTimeNow	ARCCore	ClassMember	Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned.
ARCCore.REx.Inc	ARCCore	ClassMember	Increases recursive count.
ARCCore.UtilCore.CurrentlyStartingUp	ARCCore	ClassMember	Called once at application startup after all Attribute instances in the C# code has been processed.
ARCCore.REx.Dec	ARCCore	ClassMember	This method should be called from inside a 'finally' block, in order to secure its execution, if not your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-.
ARCCore.UtilCore.Assemblies	ARCCore	ClassMember	All relevant assemblies for application.
ARCCore.InvalidTypeException	ARCCore	Class
ARCCore.UtilCore.Culture	ARCCore	ClassMember	The general culture used for parsing.
ARCCore.InvalidTypeException.AssertAssignable	ARCCore	ClassMember	Asserts that expectedType.IsAssignableFrom(foundType)
ARCCore.UtilCore.Culture_en_US	ARCCore	ClassMember	Used by -DoubleTryParse-.
ARCCore.InvalidTypeException.AssertEquals	ARCCore	ClassMember	Asserts that expectedType.Equals(foundType)
ARCCore.UtilCore.DefaultAgoRapideEncoding	ARCCore	ClassMember	The standard encoding used for text (UTF8).
ARCCore.StreamProcessor+StorageFile.Length	ARCCore	ClassMember	Wrongly placed. Belongs to each individual revision file.
ARCCore.TValue	ARCCore	Class	Placeholder for any class type suitable as generic type parameter -PValue-.
ARCCore.StreamProcessor+StorageFile.Properties	ARCCore	ClassMember	Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on.
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException	ARCCore	Class	Helps to clean up any confusion about which -BaseAttribute- to use in a given concept.
ARCCore.BaseAttributeP	ARCCore	Enum	Describes class -BaseAttribute-.
ARCCore.PK+BasePKAttributeNotFoundException<T>	ARCCore	Class	Explains how to implement a given -BasePKAttribute- for an enum
ARCCore.BaseAttributeP.Description	ARCCore	EnumMember	The description for the attribute, like this description
ARCCore.PK+PKBoolPair	ARCCore	Class	Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection).

Generated 2026-11-04 17:15:10.420 UTC