[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 145 > < TAKE 224 >

224 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.PCollection.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.GetOrAddPV	ARCCore	ClassMember	Gets value. If not set then value will be added
ARCCore.PCollection.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.GetP	ARCCore	ClassMember	Gets a single property for this object.
ARCCore.PCollection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.TryGetP Overload2	ARCCore	ClassMember	Note that not relevant for single-value properties like -PValue-.
ARCCore.IGetKeysEqualToValue	ARCCore	Class	Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.IP.GetPV	ARCCore	ClassMember	Gets a single property's value for this object. Returns default value if not successful.
ARCCore.PConcurrent	ARCCore	Class	A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.IP.TryGetPV	ARCCore	ClassMember	Gets a single property's value for the given property key.
ARCCore.PConcurrent.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.EnumeratorReturnsEmptyCollection	ARCCore	ClassMember	Hint for how to avoid calling enumerator.Count() when all you need is to decide if collection is empty or not.
ARCCore.PExact<EnumType>	ARCCore	Class	Very -MemoryConsumption- efficient alternative to -PRich-.
ARCCore.IP.IsValid	ARCCore	ClassMember	Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.PExact<EnumType>..ctor	ARCCore	ClassMember	Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.IP.Item	ARCCore	ClassMember	Offers string-based direct indexing.
ARCCore.PRich	ARCCore	Class	Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.IP.AllIPDerivedTypesDict	ARCCore	ClassMember	Offers for lookup of a type given its string representation.
ARCCore.PRich.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.AllIPDerivedTypesDictIKType	ARCCore	ClassMember	Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.PRich.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.P	ARCCore	Class	'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.PValue<T>	ARCCore	Class	Single value storage.
ARCCore.P.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PValue<T>.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.P.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PValue<T>.TryGetV	ARCCore	ClassMember	Supports duck typing.
ARCCore.ICreated	ARCCore	Class	A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.PValue<T>.ConvertObjectToString	ARCCore	ClassMember	Converts object to string.
ARCCore.PCollection	ARCCore	Class	A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.PValue<T>.ToString	ARCCore	ClassMember	Do no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.PCollection.TrySetPP	ARCCore	ClassMember	Replaces default interface method -TrySetPP-.
ARCCore.ActualConnection.SetUpToDatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-. Not used by -Client-.
ARCCore.PExact<EnumType>.Storage	ARCCore	ClassMember	Uses int-value of -__enum- minus 1 as index.
ARCCore.ActualConnection.InitializeOutgoingConnection	ARCCore	ClassMember	Relevant for -Outgoing-.
ARCCore.PII	ARCCore	Class	PII = property for storing individual items.
ARCCore.ActualConnection.Communicate	ARCCore	ClassMember	Common for both -Incoming- and -Outgoing-.
ARCCore.PII.TryGetV	ARCCore	ClassMember	Since value is stored in keys, we need to override this method.
ARCCore.ActualConnection.LogAndSendErrorConditionData	ARCCore	ClassMember	Called when a serious error condition has been discovered and connection should be terminated.
ARCCore.PII.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection.Send	ARCCore	ClassMember	Sends all messages in queue.
ARCCore.IPII	ARCCore	Class	Future expansion, using different classes for storing, not only -PII-.
ARCCore.ActualConnection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IIKII	ARCCore	Class	Related to -PII-, property for storing individual items
ARCCore.ActualConnection..ctor	ARCCore	ClassMember	Note parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.IIKII.PackParseResultForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.MonkeyWrench	ARCCore	Class	Describes level of 'spanner-throwing' this connection shall contibute with
ARCCore.IIKII.PackObjectForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance	ARCCore	ClassMember	See also -OnlyNewDataIsRequested.
ARCCore.PValue<T>.DeepCopy	ARCCore	ClassMember	Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy
ARCCore.ConnectionInstruction	ARCCore	Class	The instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.PValue<T>..ctor	ARCCore	ClassMember	Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.ConnectionInstruction.Initialize	ARCCore	ClassMember	Initializes to sane values.
ARCCore.PValueEmpty	ARCCore	Class	Represents the 'no value'.
ARCCore.ConnectionInstruction.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PValueEmpty.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.ConnectionInstruction.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PValueEmpty.ToPropertyStream	ARCCore	ClassMember	Typicall return value could be something like
ARCCore.Sharding	ARCCore	Class	Enables load-balancing by describing what data should be sent over a given connection.
ARCCore.ActualConnection	ARCCore	Class	The actual connection, its internal state, queue for sending and so on.
ARCCore.PropertyStreamLine	ARCCore	Class	Has two main functions:
ARCCore.ActualConnection.SetMyUpdatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.PropertyStreamLine.EncodeKeys	ARCCore	ClassMember	Encodes the key part of a -PropertyStreamLine-.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.PropertyStreamLine.StoreFailSafe	ARCCore	ClassMember	Stores if possible and fails silently.
ARCCore.ClientUpdatePosition	ARCCore	Class	Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.PropertyStreamLine.StoreFailure	ARCCore	ClassMember	Stores a 'ParseOrStoreFailure'-object.
ARCCore.ClientUpdatePosition.Filename	ARCCore	ClassMember	Filename like '2020-04-03 08:42:22_R001'
ARCCore.PropertyStreamLine.TryStore	ARCCore	ClassMember	Stores the given -PropertyStreamLineParsed- in the given storage object.
ARCCore.ClientUpdatePosition.Index	ARCCore	ClassMember	Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.PropertyStreamLine.AllowedKeyChars	ARCCore	ClassMember	Allowed characters in the Key-part of a -PropertyStreamLine-.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty	ARCCore	ClassMember	Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.PropertyStreamLine.AllowedValueChars	ARCCore	ClassMember	Allowed characters in the Value-part of a -PropertyStreamLine-.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested	ARCCore	ClassMember	Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.PropertyStreamLineParsed	ARCCore	Class	Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John.
ARCCore.ClientUpdatePosition.IsGoBack	ARCCore	ClassMember	Has to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.PropertyStreamLineParsed.ToString	ARCCore	ClassMember	Note relatively complex operation of 'restoring' original property stream line.
ARCCore.ClientUpdatePosition.IsAtEndOfStream	ARCCore	ClassMember	Necessary in order to implement -AdHocQuery-.
ARCCore.PropertyStreamLineParsed.TryParse	ARCCore	ClassMember	Generate list of <(IK key, Type valueType)> together with value from value part.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance	ARCCore	ClassMember	See also -ClientDatastoreIsEmpty.
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp	ARCCore	ClassMember	Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.
ARCCore.PropertyStreamLine.EncodeValues	ARCCore	ClassMember	Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing	ARCCore	ClassMember	Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client).
ARCCore.PropertyStreamLine.EncodeKeyPart	ARCCore	ClassMember	Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.StorageFile	ARCCore	Class	Implemented only in order to store some ideas about -Hash-.
ARCCore.PropertyStreamLine.EncodeValuePart	ARCCore	ClassMember	Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.StorageFile.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PropertyStreamLine.Decode	ARCCore	ClassMember	Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-.
ARCCore.StorageFile.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PropertyStreamLine.TryParseDirectToIP	ARCCore	ClassMember	Parses a series of -PropertyStreamLine- directly to the given type of -IP-.
ARCCore.Subscription	ARCCore	Class	A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner.
ARCCore.PropertyStreamLine.TryParseDirectToProperty	ARCCore	ClassMember	Parses direct to a given property value.
ARCCore.Subscription.FromTime	ARCCore	ClassMember	TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?).
ARCCore.PropertyStreamLine.ParseAndStore	ARCCore	ClassMember	Note that throws exception if -TryParseAndStore- fails.
ARCCore.Subscription.ToTime	ARCCore	ClassMember	TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?).
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe	ARCCore	ClassMember	If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed.
ARCCore.Subscription.IsMatch Overload1	ARCCore	ClassMember	Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line.
ARCCore.PropertyStreamLineParsed.IsComment	ARCCore	ClassMember	Signifies that property stream line given for parsing started with '//' (two forward slashes).
ARCCore.Subscription.IsMatch Overload2	ARCCore	ClassMember	Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements).
ARCCore.PropertyStreamLineParsed.Keys	ARCCore	ClassMember	The keys part of the -PropertyStreamLine-, that is, everything before ' = '.
ARCCore.Subscription.SyntaxHelp	ARCCore	ClassMember	'+*' Subscribe to everything in database.
ARCCore.PropertyStreamLineParsed.Value	ARCCore	ClassMember	The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '.
ARCCore.Subscription.IsAdd	ARCCore	ClassMember	Corresponds to whether value starts with a plus sign, '+' or not.
ARCCore.StreamProcessor	ARCCore	Class	Implements the storage mechanism for AgoRapide.
ARCCore.Subscription.IsRemove	ARCCore	ClassMember	Corresponds to whether value starts with a minus sign, '+' or not.
ARCCore.StreamProcessor.CreateBareBonesInstance	ARCCore	ClassMember	Creates a bare-bones -StreamProcessor- instance.
ARCCore.UtilCore	ARCCore	Class	Utility methods for -ARCCore-.
ARCCore.StreamProcessor.Initialize	ARCCore	ClassMember	Initializes this instance of -StreamProcessor-
ARCCore.UtilCore.AssertCurrentlyStartingUp	ARCCore	ClassMember	Normally called from non-thread safe methods that should be run single-threaded at application startup only.
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections	ARCCore	ClassMember	Not relevant for -CoreDB-.
ARCCore.UtilCore.DoubleTryParse	ARCCore	ClassMember	Note that treats ',' (comma) as decimal point (not as thousands separator).
ARCCore.StreamProcessor.StartTCPIPCommunication	ARCCore	ClassMember	Starts communicating over TCP/IP.
ARCCore.StreamProcessor.ReceiveAndDistribute	ARCCore	ClassMember	Process all messages in receive queue.
ARCCore.StreamProcessor.AddTimestampAsRequired	ARCCore	ClassMember	Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.StreamProcessor.ReadStorageFile	ARCCore	ClassMember	Reads one storage file from disk
ARCCore.StreamProcessor.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.StreamProcessor.OutsideLocalReceiver	ARCCore	ClassMember	The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class.
ARCCore.PropertyStreamLineWithOrigin	ARCCore	Class	The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source).
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin	ARCCore	ClassMember	Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver	ARCCore	ClassMember	Means 'send to local receiver regardless of origin'.
ARCCore.UtilCore.DateTimeNow	ARCCore	ClassMember	Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned.
ARCCore.UtilCore.CurrentlyStartingUp	ARCCore	ClassMember	Called once at application startup after all Attribute instances in the C# code has been processed.
ARCCore.UtilCore.Assemblies	ARCCore	ClassMember	All relevant assemblies for application.
ARCCore.UtilCore.Culture	ARCCore	ClassMember	The general culture used for parsing.
ARCCore.UtilCore.Culture_en_US	ARCCore	ClassMember	Used by -DoubleTryParse-.
ARCCore.UtilCore.DefaultAgoRapideEncoding	ARCCore	ClassMember	The standard encoding used for text (UTF8).
ARCCore.UtilCore.ValidDateTimeFormats	ARCCore	ClassMember	'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd'
ARCCore.UtilCore.ValidTimeSpanFormats	ARCCore	ClassMember	'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff'
ARCCore.REx	ARCCore	Class	REx = 'TooDeepRecursiveDepthException'
ARCCore.REx.Inc	ARCCore	ClassMember	Increases recursive count.
ARCCore.REx.Dec	ARCCore	ClassMember	This method should be called from inside a 'finally' block, in order to secure its execution, if not your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-.
ARCCore.InvalidTypeException	ARCCore	Class
ARCCore.InvalidTypeException.AssertAssignable	ARCCore	ClassMember	Asserts that expectedType.IsAssignableFrom(foundType)
ARCCore.InvalidTypeException.AssertEquals	ARCCore	ClassMember	Asserts that expectedType.Equals(foundType)
ARCCore.TValue	ARCCore	Class	Placeholder for any class type suitable as generic type parameter -PValue-.
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException	ARCCore	Class	Helps to clean up any confusion about which -BaseAttribute- to use in a given concept.
ARCCore.ClassAttributeP.SubTypes	ARCCore	EnumMember	Direct and indirect sub types of this class.
ARCCore.ClassAttributeP.Interfaces	ARCCore	EnumMember	All interfaces that this class and its base classes implement
ARCCore.ClassAttributeP.InterfacesDirectlyImplemented	ARCCore	EnumMember	All interfaces that this class directly implements.
ARCCore.ClassAttributeP.CorrespondingEnumType	ARCCore	EnumMember	Only relevant when implements -IP-.
ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage	ARCCore	EnumMember	Only relevant when implements -IP- and when a -CorrespondingEnumType- is found.
ARCCore.ClassMemberAttributeP	ARCCore	Enum	Describes class -ClassMemberAttribute-.
ARCCore.ClassMemberAttributeP.DeclaringType	ARCCore	EnumMember	The actual MemberInfo.DeclaringType.
ARCCore.ClassMemberAttributeP.MethodName	ARCCore	EnumMember	The actual MemberInfo.Name.
ARCCore.ClassMemberAttributeP.MethodSignature	ARCCore	EnumMember	The actual MemberInfo.ToString.
ARCCore.EnumAttributeP	ARCCore	Enum	Describes class -EnumAttribute-.
ARCCore.EnumAttributeP.AssemblyName	ARCCore	EnumMember	The assembly in which this class resides.
ARCCore.EnumAttributeP.EnumNamespace	ARCCore	EnumMember	The namespace for -EnumType-.
ARCCore.EnumAttributeP.EnumType	ARCCore	EnumMember	The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for
ARCCore.EnumAttributeP.AREnumType	ARCCore	EnumMember	Note that will default to -__invalid- if not explicit set.
ARCCore.EnumAttributeP.CorrespondingClass	ARCCore	EnumMember	Only relevant when -PropertyKeyEnum-.
ARCCore.EnumMemberAttributeP	ARCCore	Enum	Describes class -EnumMemberAttribute-.
ARCCore.ARConcepts.PropertyAccess	ARCCore	EnumMember	The general mechanism for accessing properties of objects in AgoRapide.
ARCCore.ARConcepts.AvoidingRepetition	ARCCore	EnumMember	Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide.
ARCCore.ARConcepts.AgoRapideHistory	ARCCore	EnumMember	AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language).
ARCCore.ARConcepts.AdHocQuery	ARCCore	EnumMember	The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-.
ARCCore.ARConcepts.StandardAgoRapideCode	ARCCore	EnumMember	Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code)
ARCCore.ARConcepts.ApplicationSpecificCode	ARCCore	EnumMember	Code specific for an end-application.
ARCCore.ARConcepts.MemoryConsumption	ARCCore	EnumMember	A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption.
ARCCore.ARConcepts.Indexing	ARCCore	EnumMember	In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-.
ARCCore.ARConcepts.CoreDBSynchronization	ARCCore	EnumMember	The concept of how multiple -CoreDB- instances synchronizes their data.
ARCCore.ARConcepts.SingleThreadedCode	ARCCore	EnumMember	Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-).
ARCCore.ARConcepts.DataRetention	ARCCore	EnumMember	The concept of when to delete old data (if deemed necessary).
ARCCore.ARConcepts.NoRealDeletion	ARCCore	EnumMember	AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data).
ARCCore.ARConcepts.ManyToManyRelations	ARCCore	EnumMember	-ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table).
ARCCore.ARConcepts.Documentation	ARCCore	EnumMember	Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible.
ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages	ARCCore	EnumMember	The abstraction level in AgoRapide is very high.
ARCCore.ARConcepts.ExposingApplicationState	ARCCore	EnumMember	The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool.
ARCCore.Cardinality.HistoryOnly	ARCCore	EnumMember	The default value.
ARCCore.Cardinality.WholeCollection	ARCCore	EnumMember	Values are always set as a whole (there is no need or no meaning in setting or deleting individual items)
ARCCore.Cardinality.IndividualItems	ARCCore	EnumMember	Values are supposed to be set and 'deleted' individually.
ARCCore.PSPrefix	ARCCore	Enum	Describes some recommended prefixed to use in a -PropertyStreamLine-.
ARCCore.PSPrefix.dt	ARCCore	EnumMember	Data, like dt/
ARCCore.PSPrefix.cmd	ARCCore	EnumMember	Command, like cmd/
ARCCore.PSPrefix.app	ARCCore	EnumMember	Application state, like app/
ARCCore.PSPrefix.doc	ARCCore	EnumMember	Documentation, like doc/.
ARCCore.PKHTMLAttributeP	ARCCore	Enum	Describes class -PKRelAttribute-.
ARCCore.BaseAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.Cardinality	ARCCore	Enum	Describes how multiple instances of a property is supposed to be handled.
ARCCore.PKHTMLAttributeP.Encoder	ARCCore	EnumMember	The class doing the HTML-encoding.
ARCCore.BasePKAttribute	ARCCore	Class	The class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.PKRelAttributeP.EnforceReferentialIntegrity	ARCCore	EnumMember	If TRUE then referential integrity will be enforced by -TryStore-.
ARCCore.PKLogAttributeP	ARCCore	Enum	Describes class -PKLogAttribute.
ARCCore.BasePKAttribute.GetAttributes	ARCCore	ClassMember	Note that illegal to call for other than -PropertyKeyEnum-.
ARCCore.PKTypeAttributeP	ARCCore	Enum	Describes class -PKTypeAttribute-.
ARCCore.PKLogAttributeP.DoNotLogAtAll	ARCCore	EnumMember	Originates from -DoNotLogAtAll-.
ARCCore.BasePKAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKTypeAttributeP.Type	ARCCore	EnumMember	The type of this Property.
ARCCore.PKLogAttributeP.CountInterval	ARCCore	EnumMember	For a value of n, log only every n'th time the property is changed.
ARCCore.BasePKAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttributeP.DefaultValue	ARCCore	EnumMember	The default value.
ARCCore.PKLogAttributeP.TimeInterval	ARCCore	EnumMember	Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-.
ARCCore.ClassAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.PKTypeAttributeP.Cardinality	ARCCore	EnumMember	Describes how multiple instances of a property is supposed to be handled.
ARCCore.PKRelAttributeP	ARCCore	Enum	Describes class -PKRelAttribute-.
ARCCore.ClassAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PP.Cid	ARCCore	EnumMember	Creator id (entity which created this property).
ARCCore.PKRelAttributeP.ForeignEntity	ARCCore	EnumMember	The type of foreign entity that this property points to.
ARCCore.ClassMemberAttribute	ARCCore	Class	Describes a member of a class (a method).
ARCCore.PP.Value	ARCCore	EnumMember	The actual value.
ARCCore.ConnectionInstructionP.MultipleConnectionUsage	ARCCore	EnumMember
ARCCore.ClassMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PP.Valid	ARCCore	EnumMember	Timestamp when property was last known to be (still) valid
ARCCore.ConnectionInstructionP.Sharding	ARCCore	EnumMember
ARCCore.ClassMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PP.Vid	ARCCore	EnumMember	Validator id, that is entity which set -Valid- for this property.
ARCCore.MultipleConnectionUsage	ARCCore	Enum	Enables fault-tolerance by describing use of multiple connections
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PConcurrentP.Heartbeat	ARCCore	EnumMember
ARCCore.MultipleConnectionUsage.Admin	ARCCore	EnumMember	Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make.
ARCCore.EnumAttribute	ARCCore	Class	Describes an enum.
ARCCore.ActualConnectionP	ARCCore	Enum	Describes class -ActualConnection-.
ARCCore.MultipleConnectionUsage.RoundRobin	ARCCore	EnumMember	This connection to be used in a turn based system, together with other connections with -RoundRobin-.
ARCCore.EnumAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.ActualConnectionP.Id	ARCCore	EnumMember	When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection.
ARCCore.MultipleConnectionUsage.Simultaneous	ARCCore	EnumMember	This connection to be used simultaneously with other connections with -Simultaneous-
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ActualConnectionP.ConnectionInstruction	ARCCore	EnumMember	Only relevant when we are an -Outgoing-.
ARCCore.StreamProcessorP	ARCCore	Enum	Describes class -StreamProcessor-.
ARCCore.EnumAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ActualConnectionP.ConnectionDirection	ARCCore	EnumMember
ARCCore.StreamProcessorP.LocalStorageFolder	ARCCore	EnumMember	The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar
ARCCore.EnumAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ActualConnectionP.CountReceiveMessage	ARCCore	EnumMember

Generated 2025-11-27 00:14:16.016 UTC