[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 136 > < TAKE 224 >
224 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.PExact<EnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.PExact<EnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.StreamProcessorP.CountReceiveLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- with -HasLocalOrigin-. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.StreamProcessorP.CountReceiveNonLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- not with -HasLocalOrigin-. |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.StorageFileP | ARCCore | Enum | Describes class -StorageFile-. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.StorageFileP.Filename | ARCCore | EnumMember | |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.Demonstrator.DemonstrateITypeDescriber | ARCDoc | ClassMember | Demonstrates use of -ITypeDescriber- for describing single-property values. |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCDoc.Demonstrator.DemonstratePRichHierarchicalStorage | ARCDoc | ClassMember | Demonstrates use of -PRich-, how it receives -PropertyStream--lines and builds up a strongly typed hierarchical object storage. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCDoc.Demonstrator.DemonstratePropertyStream | ARCDoc | ClassMember | Demonstrates use of -PropertyStream- by generating local data (documentation data) and writing locally to console. |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.Demonstrator.DemonstrateBareBonesClient | ARCDoc | ClassMember | Demonstrates adding -PropertyStream--lines to -CoreDB- without using ANY AgoRapide component, only standard TCP/IP functionality in .NET. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCDoc.DocFragCollection.Create | ARCDoc | ClassMember | Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies. |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.DocFragCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCDoc.DocFragCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCDoc.DocLink | ARCDoc | Class | Describes to where a single HTML link points. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCDoc.DocLinkResolution.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCDoc.DocLinkResolution.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCDoc.DocLinkResolutionCollection | ARCDoc | Class | Contains a collection of -DocLinkResolution- objects. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCDoc.DocLinkResolutionCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCDoc.DocLinkResolutionCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCDoc.Documentator | ARCDoc | Class | General class for documenting AgoRapide and also your own -ApplicationSpecificCode-. |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCDoc.Documentator.CreateAndInsert | ARCDoc | ClassMember | Creates an instance of -Documentator- with a natural hierarchical representation of documentation attributes found in the given assemblies. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCDoc.Documentator.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCDoc.Documentator.CreateHTOCStandard | ARCDoc | ClassMember | Creates a 'standard' table of contents, structured by assembly and each assembly divided into 'Class' and 'Enum'. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCDoc.Documentator.CreateHTOCNamespace | ARCDoc | ClassMember | Creates a table of contents structured by namespace |
| ARCCore.IP.AddPV | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCDoc.Documentator.CreateHTOCInheritance | ARCDoc | ClassMember | Creates a table of contents structured by inheritance (classes and interfaces only, not members). |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCDoc.Documentator.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCDoc.Documentator.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCDoc.Documentator.DocLinks | ARCDoc | ClassMember | Set by -CreateAndInsert-. |
| ARCCore.IP.GetP | ARCCore | ClassMember | Gets a single property for this object. |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Offers for lookup of a type given its string representation. |
| ARCDoc.Documentator.DocLinkResolutionLocation | ARCDoc | ClassMember | Default position within the global storage context of doc link resolution pages. |
| ARCCore.IP.TryGetP Overload2 | ARCCore | ClassMember | Note that not relevant for single-value properties like -PValue-. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCDoc.DummyEnum | ARCDoc | Class | TODO: Document better what this is for (and change name) |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCDoc.HLocationCollection.WriteAllContentHTMLToDisk | ARCDoc | ClassMember | Writes all -HLocation- results to a hierarhical folder structure as static HTML files with (optionally) -LinkInsertionInDocumentation-. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HLocationCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCDoc.HLocationCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCDoc.HTOC | ARCDoc | Class | HTOC = Hierarchical table of contents. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCDoc.HTOC.Create | ARCDoc | ClassMember | Structures content hierarchically according to the criteria for each level. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload2 | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload1 | ARCDoc | ClassMember | Use this method in any class where a table-of-contents type of view is desireable |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HTOC.CreateInitialContent | ARCDoc | ClassMember | Helper method for creation of a -FilterBranch-. |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCDoc.HTOC.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCDoc.HTOC.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCDoc.HTOC.HTOCContentThisLevelKey | ARCDoc | ClassMember | The key used for storing the actual content at this level. |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.PKDocAttribute | ARCDoc | Class | Describes documentation and presentation of a property. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCDoc.PKDocAttribute.Initialize | ARCDoc | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCDoc.PKDocAttribute.TryRemoveP | ARCDoc | ClassMember | Should probably never be used. |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCDoc.PKDocAttribute.PriorityOrder | ARCDoc | ClassMember | See -PriorityOrder-. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCDoc.PKDocAttribute.IsDefault | ARCDoc | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCDoc.UtilDoc | ARCDoc | Class | Utility methods for -ARCDoc-. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCDoc.UtilDoc.GetCurrentLevelInHierarchyAsHTML | ARCDoc | ClassMember | Returns an HTML presentation of the given link context, with links pointing backwards to each level in the hierarchy. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCDoc.UtilDoc.GenerateHTMLPage | ARCDoc | ClassMember | Wraps the parameter inside a <html><head></head><body>...</body></html> enclosure with some rudimentare CSS. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCDoc.HTOC+ParentChain | ARCDoc | Class | Used by -FilterNode- in order to keep track of node's parents. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCDoc.AppleP | ARCDoc | Enum | Describes class -Apple-. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCDoc.AppleP.Name | ARCDoc | EnumMember | The name of the apple |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCDoc.AppleP.Colour | ARCDoc | EnumMember | |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCDoc.BananaP | ARCDoc | Enum | Describes class -Banana-. |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCDoc.DocFragP.IsInheritedDoc | ARCDoc | EnumMember | Relevant for class members (methods). |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCDoc.DocFragP.Lines | ARCDoc | EnumMember | Number of lines of text in -Description- and -LongDescription- for this fragment. |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
Generated 2025-11-27 05:47:23.582 UTC