[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 129 > < TAKE 496 >
496 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.IP.TryGetP Overload1 | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Offers for lookup of a type given its string representation. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Makes the following modifications to the data: |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.EnumeratorReturnsEmptyCollection | ARCCore | ClassMember | Hint for how to avoid calling enumerator.Count() when all you need is to decide if collection is empty or not. |
| ARCCore.PExact<EnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.PExact<EnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.PExact<EnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
| ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
| ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
| ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
| ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
| ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
| ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
| ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
| ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
| ARCCore.InvalidTypeException | ARCCore | Class | |
| ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
| ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
| ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
| ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
| ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
| ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
| ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
| ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
| ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
| ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
| ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
| ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
| ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
| ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
| ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
| ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
| ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
| ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
| ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
| ARCCore.ARComponents.ARCDoc | ARCCore | EnumMember | A library supporting documentation and demonstrating usage of AgoRapide. |
| ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
| ARCCore.ARComponents.ARCQuery | ARCCore | EnumMember | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. |
| ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
| ARCCore.ARComponents.ARCSync | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
| ARCCore.ARComponents.ARCSec | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
| ARCCore.ARComponents.ARCAPI | ARCCore | EnumMember | A library providing an API on top of the -PropertyStream-. |
| ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCCore.ARComponents.ARAAPI | ARCCore | EnumMember | The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc. |
| ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
| ARCCore.ARConcepts | ARCCore | Enum | The overarching concepts upon which AgoRapide is built. |
| ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.ARConcepts.GettingStarted | ARCCore | EnumMember | AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET Standard 2.1. |
| ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
| ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
| ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
| ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
| ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
| ARCCore.ARConcepts.PropertyAccess | ARCCore | EnumMember | The general mechanism for accessing properties of objects in AgoRapide. |
| ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.ARConcepts.AvoidingRepetition | ARCCore | EnumMember | Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide. |
| ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
| ARCCore.ARConcepts.AgoRapideHistory | ARCCore | EnumMember | AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language). |
| ARCCore.ARComponents | ARCCore | Enum | Contains short descriptions of the different 'official' AgoRapide components. |
| ARCCore.AREnumType.PropertyKeyEnum | ARCCore | EnumMember | Designates enums that describe relevant values for an 'entity' object like 'Customer'. |
| ARCCore.ARConcepts.AdHocQuery | ARCCore | EnumMember | The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-. |
| ARCCore.AREnumType.OrdinaryEnum | ARCCore | EnumMember | Designates "Ordinary" enums used for indicating range of valid values for a given key |
| ARCCore.ARConcepts.StandardAgoRapideCode | ARCCore | EnumMember | Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code) |
| ARCCore.AREnumType.DocumentationOnlyEnum | ARCCore | EnumMember | Designates enums that provide a central repository of explanation of terms that are not present in the C# code. |
| ARCCore.ARConcepts.ApplicationSpecificCode | ARCCore | EnumMember | Code specific for an end-application. |
| ARCCore.ARNodeType | ARCCore | Enum | Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-. |
| ARCCore.ARConcepts.MemoryConsumption | ARCCore | EnumMember | A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption. |
| ARCCore.ARNodeType.CoreDB | ARCCore | EnumMember | A node containing the core or central database. |
| ARCCore.ARConcepts.Indexing | ARCCore | EnumMember | In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-. |
| ARCCore.ARNodeType.ArmDB | ARCCore | EnumMember | A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only) |
| ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
| ARCCore.ARNodeType.Client | ARCCore | EnumMember | An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-. |
| ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
| ARCCore.Cardinality | ARCCore | Enum | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
| ARCCore.Cardinality.HistoryOnly | ARCCore | EnumMember | The default value. |
| ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
| ARCCore.Cardinality.WholeCollection | ARCCore | EnumMember | Values are always set as a whole (there is no need or no meaning in setting or deleting individual items) |
| ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
| ARCCore.Cardinality.IndividualItems | ARCCore | EnumMember | Values are supposed to be set and 'deleted' individually. |
| ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
| ARCCore.PSPrefix | ARCCore | Enum | Describes some recommended prefixed to use in a -PropertyStreamLine-. |
| ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
| ARCCore.PSPrefix.dt | ARCCore | EnumMember | Data, like dt/ |
| ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
| ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command, like cmd/ |
| ARCCore.ARConcepts.LinkInsertionInDocumentation | ARCCore | EnumMember | Documentation with links is much easier to read. |
| ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
| ARCCore.ARConcepts.TryPatternAndNull | ARCCore | EnumMember | AgoRapide uses non-nullable reference types as default throughout the system |
| ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation, like doc/. |
| ARCCore.AREnumType | ARCCore | Enum | Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-. |
| ARCCore.PP.Created | ARCCore | EnumMember | Timestamp when property was created in database. |
| ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PP.Cid | ARCCore | EnumMember | Creator id (entity which created this property). |
| ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
| ARCCore.PP.Value | ARCCore | EnumMember | The actual value. |
| ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
| ARCCore.PP.Valid | ARCCore | EnumMember | Timestamp when property was last known to be (still) valid |
| ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
| ARCCore.PP.Vid | ARCCore | EnumMember | Validator id, that is entity which set -Valid- for this property. |
| ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
| ARCCore.PP.Invalid | ARCCore | EnumMember | Timestamp when property was invalidated / 'deleted'. |
| ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
| ARCCore.PP.Iid | ARCCore | EnumMember | Invalidator id, that is entity which set -Invalid- for this property (or removed / 'undid' the invalidation by setting the value to '0001-01-01'). |
| ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.PP.ExceptionText | ARCCore | EnumMember | General property for logging of exceptions, usually set through -HandleException-. |
| ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
| ARCCore.BaseAttribute | ARCCore | Class | Instances of this class are used as source of documentation and data for the API. |
| ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
| ARCCore.BaseAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
| ARCCore.BasePKAttribute | ARCCore | Class | The class containing the actual attributes used for -TaggingOfPropertyKeys-. |
| ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
| ARCCore.BasePKAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKTypeAttributeP.DefaultValue | ARCCore | EnumMember | The default value. |
| ARCCore.ClassAttribute | ARCCore | Class | Describes a class. |
| ARCCore.PKTypeAttributeP.Cardinality | ARCCore | EnumMember | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.PKTypeAttributeP.IsObligatory | ARCCore | EnumMember | True means value is obligatory. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.PKTypeAttributeP.BoilerplateCodeProperties | ARCCore | EnumMember | Automatically generated boilerplate code that implements traditional setters and getters for this key. |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCCore.PP | ARCCore | Enum | Describes meta data for any class (property) implementing -IP-. |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| ARCDoc.Apple.GetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCDoc.Apple.TryGetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCDoc.Apple.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCDoc.Apple.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCDoc.Apple.Name | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCDoc.Banana | ARCDoc | Class | Implements -IP- directly and uses traditional property storage for optimum -MemoryConsumption- efficiency. |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCDoc.SomeAppComponent.MethodC | ARCDoc | ClassMember | Note structured format in logging. |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCDoc.SomeAppComponent.MethodD | ARCDoc | ClassMember | Same as MethodC- but returns data ('Func<string>()' instead of 'Action()') |
| ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
| ARCDoc.SomeAppComponent.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
| ARCDoc.DocFrag | ARCDoc | Class | DocFrag = Document fragment. |
| ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
| ARCDoc.DocFrag.Create Overload1 | ARCDoc | ClassMember | Creates a -DocFrag- object representing an assembly or a namespace. |
| ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
| ARCDoc.DocFrag.Create Overload2 | ARCDoc | ClassMember | Creates a -DocFrag- object representing a class, class member, enum or enum member. |
| ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
| ARCDoc.DocFrag.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
| ARCDoc.DocFrag.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
| ARCDoc.DocFrag.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
| ARCDoc.DocFragCollection | ARCDoc | Class | Contains a collection of -DocFrag- objects. |
| ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
| ARCDoc.DocFragCollection.Create | ARCDoc | ClassMember | Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies. |
| ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
| ARCDoc.DocFragCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
| ARCDoc.DocFragCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessorP.CountOutgoingConnections | ARCCore | EnumMember | |
| ARCDoc.DocLink | ARCDoc | Class | Describes to where a single HTML link points. |
| ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
| ARCDoc.DummyEnum.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.StreamProcessorP.CountReceiveLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- with -HasLocalOrigin-. |
| ARCDoc.DummyEnum.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessorP.CountReceiveNonLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- not with -HasLocalOrigin-. |
| ARCDoc.Extensions | ARCDoc | Class | Contains various extension methods for -IP- and -IKIP- related to documentating / reporting / HTML. |
| ARCCore.StorageFileP | ARCCore | Enum | Describes class -StorageFile-. |
| ARCDoc.Extensions.ToHTMLSimpleSingleRecursive | ARCDoc | ClassMember | Calls -ToHTMLSimpleSingle- recursively. |
| ARCCore.StorageFileP.Filename | ARCCore | EnumMember | |
| ARCDoc.Extensions.ToHTMLSimpleSingle | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter. |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCDoc.Extensions.ToHTMLSimpleSingleInternal | ARCDoc | ClassMember | Hack in order to escape check for direct implementation in actual class of -ToHTMLSimpleSingle- in -ToHTMLSimpleSingle-. |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCDoc.Extensions.ToHTMLSimpleAsTableRow | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter as a single two column row (Key, Value) in a table. |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCDoc.Extensions.DescribeValue | ARCDoc | ClassMember | Describes the value contained withing an -IKIP- (-P-). |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCDoc.Extensions.ValueToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Value with description as a 'tooltip'. |
| ARCDoc.Banana.Name | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCDoc.Extensions.KeyToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Key with description as a 'tooltip'. |
| ARCDoc.Banana.Colour | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCDoc.HLocation | ARCDoc | Class | Simple class describing the location of a single -IP- instance within some hierarhical context. |
| ARCDoc.Demonstrator | ARCDoc | Class | Demonstrates various concepts from -ARCCore-, especially -PropertyAccess-. |
| ARCDoc.HLocation.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Demonstrator.DemonstratePropertyAccessApple | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Apple- class. |
| ARCDoc.HLocation.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessOrange | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Orange- class. |
| ARCDoc.HLocation.Content | ARCDoc | ClassMember | The Content object is not stored within the standard -IP--mechanism. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessBanana | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Banana- class. |
| ARCDoc.HLocationCollection | ARCDoc | Class | Contains a collection of -HLocation- objects. |
| ARCDoc.Demonstrator.DemonstrateITypeDescriber | ARCDoc | ClassMember | Demonstrates use of -ITypeDescriber- for describing single-property values. |
| ARCDoc.HLocationCollection.Create | ARCDoc | ClassMember | Transforms the parameter (and recursively all contained objects) into a collection of -HLocation- objects. |
| ARCDoc.Demonstrator.DemonstratePRichHierarchicalStorage | ARCDoc | ClassMember | Demonstrates use of -PRich-, how it receives -PropertyStream--lines and builds up a strongly typed hierarchical object storage. |
| ARCDoc.HLocationCollection.WriteAllContentHTMLToDisk | ARCDoc | ClassMember | Writes all -HLocation- results to a hierarhical folder structure as static HTML files with (optionally) -LinkInsertionInDocumentation-. |
| ARCDoc.Demonstrator.DemonstratePropertyStream | ARCDoc | ClassMember | Demonstrates use of -PropertyStream- by generating local data (documentation data) and writing locally to console. |
| ARCDoc.HLocationCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Demonstrator.DemonstrateBareBonesClient | ARCDoc | ClassMember | Demonstrates adding -PropertyStream--lines to -CoreDB- without using ANY AgoRapide component, only standard TCP/IP functionality in .NET. |
| ARCDoc.HLocationCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Demonstrator.DemonstrateLogConsole | ARCDoc | ClassMember | Demonstrates a quite simple log console. |
| ARCDoc.HTOC | ARCDoc | Class | HTOC = Hierarchical table of contents. |
| ARCDoc.Demonstrator.DemonstrateStreamProcessorAsClient | ARCDoc | ClassMember | Demonstrates use of -StreamProcessor- as a general client. |
| ARCDoc.HTOC.Create | ARCDoc | ClassMember | Structures content hierarchically according to the criteria for each level. |
| ARCDoc.Orange | ARCDoc | Class | Inherits -PExact- for probably the best compromise between memory consumption and easy of development. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload2 | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCDoc.Orange.Name | ARCDoc | ClassMember | See -Name- for more information. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload1 | ARCDoc | ClassMember | Use this method in any class where a table-of-contents type of view is desireable |
| ARCDoc.Orange.Storage | ARCDoc | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCDoc.HTOC.CreateInitialContent | ARCDoc | ClassMember | Helper method for creation of a -FilterBranch-. |
| ARCDoc.SomeAppComponent | ARCDoc | Class | Demonstrates how also your actual application classes, not only your data classes, should implement -IP-. |
| ARCDoc.HTOC.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocLink.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HTOC.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocLink.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HTOC.HTOCContentThisLevelKey | ARCDoc | ClassMember | The key used for storing the actual content at this level. |
| ARCDoc.DocLink.Location | ARCDoc | ClassMember | Copy of -Location-. |
| ARCDoc.PKDocAttribute | ARCDoc | Class | Describes documentation and presentation of a property. |
| ARCDoc.DocLink.Filename | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.PKDocAttribute.Initialize | ARCDoc | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.DocLink.LinkWordHTML | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.PKDocAttribute.TryRemoveP | ARCDoc | ClassMember | Should probably never be used. |
| ARCDoc.DocLink.LinkWordHTMLWithHyphens | ARCDoc | ClassMember | -LinkWordHTML- with '-' (minus sign / hyphen) prepended and appended. |
| ARCDoc.PKDocAttribute.PriorityOrder | ARCDoc | ClassMember | See -PriorityOrder-. |
| ARCDoc.DocLink.LinkWordHTMLBeforeLt | ARCDoc | ClassMember | If -LinkWordHTML contains '<' (really '<') (for generic types, like 'PValue<TValue>') then this will contain the part before '<' like 'PValue'. |
| ARCDoc.PKDocAttribute.IsDefault | ARCDoc | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.DocLink.LinkWordHTMLBeforeLtWithHyphens | ARCDoc | ClassMember | -LinkWordHTMLBeforeLt- with '-' (minus sign / hyphen) prepended and appended. |
| ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
| ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
| ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
| ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
| ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
| ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
| ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
| ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
| ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
| ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
| ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
| ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
| ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
| ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
| ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
| ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
| ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
| ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
| ARCDoc.DocLinkResolutionP.DocLinks | ARCDoc | EnumMember | The possible links for -LinkWord- |
| ARCDoc.DocumentatorP | ARCDoc | Enum | Describes class -Documentator-. |
| ARCDoc.DummyEnumP | ARCDoc | Enum | TODO: Document better what this is for (and change name) |
| ARCDoc.DummyEnumP._MemberInherited | ARCDoc | EnumMember | Contains not only members which are inherited in the object-oriented sense, but also overrides for which the only documentation was found in base class |
| ARCDoc.HLocationP | ARCDoc | Enum | Describes class -HLocation-. |
| ARCDoc.HLocationP.Location | ARCDoc | EnumMember | Folder names / hierarchical levels. |
| ARCDoc.HLocationP.Filename | ARCDoc | EnumMember | Either the last hierarhical key for the content's location, or Index.html if no location. |
| ARCDoc.HLocationP.ContentType | ARCDoc | EnumMember | The type of the content object. The actual content object is stored as -Content-. |
| ARCDoc.PKDocAttributeP | ARCDoc | Enum | Describes class -PKDocAttribute-. |
| ARCDoc.PKDocAttributeP.PriorityOrder | ARCDoc | EnumMember | Used by -DescribeValue-. |
| ARCDoc.PriorityOrder | ARCDoc | Enum | Used for general sorting / prioritizing when showing properties for an entity. |
| ARCDoc.PriorityOrder.NotImportant | ARCDoc | EnumMember | |
| ARCDoc.PriorityOrder.Important | ARCDoc | EnumMember | |
| Assembly ARCQuery | Assembly | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| ARCQuery.BinaryOperatorKey | ARCQuery | Class | Offers expressions with operators like +, -, * and /. |
| ARCQuery.BinaryOperatorKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.CompoundInvalidKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.CompoundInvalidKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.CompoundKey | ARCQuery | Class | A class able to expand the concept of entity keys. |
| ARCQuery.CompoundKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.CompoundKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.CompoundKey.Parse | ARCQuery | ClassMember | Note that no TryParse is offered here, because Parse will always succeed (it just returns -CompoundInvalidKey- if 'fails'). |
| ARCQuery.CompoundKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.CompoundKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.CompoundKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.ConstantKey<T> | ARCQuery | Class | Represents a constant expression like "' '", "', '", "42". |
| ARCQuery.ConstantKey<T>.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.ConstantKey<T>.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.ConstantKey<T>.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.ConstantKey<T>.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.ConstantKey<T>.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.EntityMethodKey | ARCQuery | Class | Key able to call read-only methods defined in the entity class with names like 'TryGet{FieldName}'. |
| ARCQuery.FunctionKey.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCQuery.FunctionKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCQuery.FunctionKey.TryParseSingleWord | ARCQuery | ClassMember | Recommended parser to use for functions without parameters. |
| ARCQuery.FunctionKey.TryGetP Overload2 | ARCQuery | ClassMember | Overload which will try to call -TryGetV- with generic type parameter, and if that does not succeed will try to call the optional 'tryParser'. |
| ARCQuery.FunctionKey.Parsers | ARCQuery | ClassMember | Instances of all the relevant sub classes of -FunctionKey-. |
| ARCQuery.FunctionKeyDate | ARCQuery | Class | Formats a date without time component. |
| ARCQuery.FunctionKeyDate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyDate.SyntaxHelp | ARCQuery | ClassMember | 'Date()' |
| ARCQuery.FunctionKeyDayOfWeek | ARCQuery | Class | Extracts DayOfWeek from field like 'Monday', 'Tuesday' and so on. |
| ARCDoc.DocFragType.Enum | ARCDoc | EnumMember | |
| ARCCore.BasePKAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.DocLink.AHrefEndPart | ARCDoc | ClassMember | 'Filename.Encoded + "> + LinkWordHTML + </a>' |
| ARCQuery.FunctionKeyDayOfWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DocFragType.EnumMember | ARCDoc | EnumMember | |
| ARCCore.ClassAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.DocLinkCollection | ARCDoc | Class | Contains a collection of -DocLink- objects. |
| ARCQuery.FunctionKeyDayOfWeek.SyntaxHelp | ARCQuery | ClassMember | 'DayOfWeek()' |
| ARCDoc.DocLinkP | ARCDoc | Enum | Describes class -DocLink-. |
| ARCCore.ClassMemberAttribute | ARCCore | Class | Describes a member of a class (a method). |
| ARCDoc.DocLinkCollection.Create | ARCDoc | ClassMember | Notes all locations and their positions in the hierarchical directory structure. |
| ARCQuery.FunctionKeyDouble | ARCQuery | Class | Converts an integer to a double (decimal value). |
| ARCDoc.DocLinkP.Location | ARCDoc | EnumMember | The location that this link points to. |
| ARCCore.ClassMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.DocLinkCollection.InsertLinks | ARCDoc | ClassMember | Does -LinkInsertionInDocumentation- on the given HTML content. |
| ARCQuery.FunctionKeyDouble.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DocLinkP.Filename | ARCDoc | EnumMember | |
| ARCCore.ClassMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.DocLinkCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyDouble.SyntaxHelp | ARCQuery | ClassMember | 'Double()' |
| ARCDoc.DocLinkP.LinkWordHTML | ARCDoc | EnumMember | Actual link as it is expected to occur in text, like '-MyCustomerClass<T>-'. |
| ARCCore.EnumAttribute.GetAttribute | ARCCore | ClassMember | Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance). |
| ARCDoc.DocLinkCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyFirstLine | ARCQuery | Class | Extracts first line from string of text. |
| ARCDoc.DocLinkResolutionP | ARCDoc | Enum | Describes class -DocLinkResolution- |
| ARCCore.EnumAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.DocLinkResolution | ARCDoc | Class | Contains a resolution page for a link word which has duplicate 'targets' (pointing to multiple -DocLink- instances). |
| ARCQuery.FunctionKeyFirstLine.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCDoc.DocLinkResolutionP.LinkWord | ARCDoc | EnumMember | |
| ARCCore.EnumMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.DocLinkResolution.ToHTMLSimpleSingle | ARCDoc | ClassMember | Gives a friendly description about possible targets for LinkWord-. |
| ARCQuery.FunctionKeyFirstLine.SyntaxHelp | ARCQuery | ClassMember | 'FirstLine()' |
| ARCQuery.BinaryOperatorKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCCore.IPAttribute | ARCCore | Class | Describes -IP- classes (describes at class-level) |
| ARCDoc.DocLinkResolution.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.FunctionKeyHourMinute | ARCQuery | Class | Formats a timespan with only the hour and minute part. Uses format hh:mm. |
| ARCQuery.BinaryOperatorKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCCore.CardinalityExtensions | ARCCore | Class | |
| ARCDoc.DocLinkResolution.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.FunctionKeyHourMinute.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.BinaryOperatorKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCCore.CardinalityExtensions.IsMultiple | ARCCore | ClassMember | Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage. |
| ARCDoc.DocLinkResolutionCollection | ARCDoc | Class | Contains a collection of -DocLinkResolution- objects. |
| ARCQuery.FunctionKeyHourMinute.SyntaxHelp | ARCQuery | ClassMember | 'HourMinute()' |
| ARCQuery.BinaryOperatorKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCCore.Extensions | ARCCore | Class | Contains a few general nice to have extensions methods. |
| ARCDoc.DocLinkResolutionCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
Generated 2025-11-26 11:26:54.870 UTC