[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 119  >   <  TAKE 112  >   

112 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.ClientUpdatePosition.FilenameARCCoreClassMemberFilename like '2020-04-03 08:42:22_R001'
ARCCore.ActualConnectionARCCoreClassThe actual connection, its internal state, queue for sending and so on.
ARCCore.ClientUpdatePosition.IndexARCCoreClassMemberIndex (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.ActualConnection.SetMyUpdatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyARCCoreClassMemberUsed by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiverARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedARCCoreClassMemberUsed by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.ActualConnection.SetUpToDatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-. Not used by -Client-.
ARCCore.ClientUpdatePosition.IsGoBackARCCoreClassMemberHas to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.ActualConnection.InitializeOutgoingConnectionARCCoreClassMemberRelevant for -Outgoing-.
ARCCore.BaseAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute.GetAttributesARCCoreClassMemberNote that illegal to call for other than -PropertyKeyEnum-.
ARCCore.BasePKAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.BasePKAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.GetAttributeARCCoreClassMemberThrows exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.ClassAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.ClassAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.ClassMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.Extensions.ToStringDBARCCoreClassMemberGives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.Extensions.ForEachARCCoreClassMemberUseful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.GetValueARCCoreClassMemberGives better error messages when reading value from directory if key does not exist
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.IKIPARCCoreClassContainer class for key (-IK-), and value (-IP-).
ARCCore.IKIP.AssertTypeIntegrityARCCoreClassMemberSee -TryAssertTypeIntegrity- for documentation.
ARCCore.IKCoded.TryCheckValidEncodedValueARCCoreClassMemberChecks if encoded value is valid.
ARCCore.IKCoded.FromCacheEncodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.FromEncodedARCCoreClassMemberNote how uses instance cache if already exists there.
ARCCore.IKCoded.TryEncodeARCCoreClassMemberReturns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKStringARCCoreClassIndex key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKString.FromCacheARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKString.FromStringARCCoreClassMemberNote how uses instance cache if already exists there
ARCCore.ParseResult.ResultARCCoreClassMemberWill be null if ErrorResponse is set.
ARCCore.ParseResult.ErrorResponseARCCoreClassMemberWill be null if Result is set
ARCCore.PKARCCoreClassPK = AgoRapide PropertyKey.
ARCCore.PK.TryGetEnumARCCoreClassMemberNote that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PK.PackParseResultForStorageInEntityObjectARCCoreClassMemberPacks result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.PackObjectForStorageInEntityObjectARCCoreClassMemberSee -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.FromEnumARCCoreClassMemberReturns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PK..ctorARCCoreClassMemberConstructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKLogAttribute.DoNotLogAtAllARCCoreClassMemberSee -DoNotLogAtAll-.
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PropertyStreamLineParsed.ValueARCCoreClassMemberThe original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '.
ARCCore.StreamProcessorARCCoreClassImplements the storage mechanism for AgoRapide.
ARCCore.StreamProcessor.CreateBareBonesInstanceARCCoreClassMemberCreates a bare-bones -StreamProcessor- instance.
ARCCore.StreamProcessor.InitializeARCCoreClassMemberInitializes this instance of -StreamProcessor-
ARCCore.PropertyStreamLineWithOrigin.HasLocalOriginARCCoreClassMemberLocally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiverARCCoreClassMemberMeans 'send to local receiver regardless of origin'.
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestampARCCoreClassMemberNormally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoingARCCoreClassMemberData received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client).
ARCCore.UtilCore.TryGetTypeFromStringFromCacheARCCoreClassMemberCorresponding method for creating string-representation of type is -ToStringDB-.
ARCCore.UtilCore.GetExceptionChainAsStringARCCoreClassMemberFollows the chain of InnerException and returns types as comma-separated string
ARCCore.UtilCore.GetExeptionDetailsARCCoreClassMemberGives as much information about exception as possible.
ARCCore.UtilCore.DateTimeTryParseARCCoreClassMemberAccepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore.TimeSpanTryParseARCCoreClassMemberAccepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore.UseLocalTimeInsteadOfUTCARCCoreClassMemberBy default AgoRapide operates only with UTC time.
ARCCore.UtilCore.DateTimeNowARCCoreClassMemberReturns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned.
ARCCore.UtilCore.CurrentlyStartingUpARCCoreClassMemberCalled once at application startup after all Attribute instances in the C# code has been processed.
ARCCore.UtilCore.AssembliesARCCoreClassMemberAll relevant assemblies for application.
ARCCore.UtilCore.CultureARCCoreClassMemberThe general culture used for parsing.
ARCCore.UtilCore.Culture_en_USARCCoreClassMemberUsed by -DoubleTryParse-.
ARCCore.UtilCore.DefaultAgoRapideEncodingARCCoreClassMemberThe standard encoding used for text (UTF8).
ARCCore.ConnectionInstruction.InitializeARCCoreClassMemberInitializes to sane values.
ARCCore.BaseAttributeARCCoreClassInstances of this class are used as source of documentation and data for the API.
ARCCore.ConnectionInstruction.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.BaseAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ConnectionInstruction.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.BasePKAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ShardingARCCoreClassEnables load-balancing by describing what data should be sent over a given connection.
ARCCore.ClassAttributeARCCoreClassDescribes a class.
ARCCore.PropertyStreamLineARCCoreClassHas two main functions:
ARCCore.EnumMemberAttributeARCCoreClassDescribes an enum's value.
ARCCore.PropertyStreamLine.EncodeKeysARCCoreClassMemberEncodes the key part of a -PropertyStreamLine-.
ARCCore.EnumMemberAttribute.GetAttributeARCCoreClassMemberNote that illegal to call for -PropertyKeyEnum-.
ARCCore.PropertyStreamLine.EncodeValuesARCCoreClassMemberTypically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.EnumMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PropertyStreamLine.EncodeKeyPartARCCoreClassMemberConverts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.CardinalityExtensionsARCCoreClass 
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnectionsARCCoreClassMemberNot relevant for -CoreDB-.
ARCCore.CardinalityExtensions.IsMultipleARCCoreClassMemberReturns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.StreamProcessor.StartTCPIPCommunicationARCCoreClassMemberStarts communicating over TCP/IP.
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.StreamProcessor.ReceiveAndDistributeARCCoreClassMemberProcess all messages in receive queue.
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.StreamProcessor.AddTimestampAsRequiredARCCoreClassMemberAdds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.StreamProcessor.ReadStorageFileARCCoreClassMemberReads one storage file from disk
ARCCore.Extensions.ResultARCCoreClassMemberReturns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.StreamProcessor.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.StreamProcessor.OutsideLocalReceiverARCCoreClassMemberThe outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class.
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PropertyStreamLineWithOriginARCCoreClassThe rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source).
ARCCore.PKRelAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.Subscription.SyntaxHelpARCCoreClassMember'+*' Subscribe to everything in database.
ARCCore.PKTypeAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.Subscription.IsAddARCCoreClassMemberCorresponds to whether value starts with a plus sign, '+' or not.
ARCCore.PKTypeAttribute.TypeARCCoreClassMemberSee -Type-.
ARCCore.Subscription.IsRemoveARCCoreClassMemberCorresponds to whether value starts with a minus sign, '+' or not.
ARCCore.PKTypeAttribute.CardinalityARCCoreClassMemberSee -Cardinality-.

Generated 2026-11-05 17:12:47.864 UTC